Automatic Retracting Running Board Installation Instructions

Drill Holes for Rear Arm
Locate the Drill Template in the parts kit. Place it along the sill 1/16" in front of the rear sill drain. Use vise grips to secure the Template to the sill. Drill a 1/8" pilot hole at each location in the Template. Remove the Template and drill the holes out to 21/64".

Drill Holes for Front Arm
Most Vehicles
Clamp the Drill Template to the pinch weld 1/8" behind the front mounting tab. Drill a 1/8" pilot hole at each location in the Template. Remove the Template and drill the holes out to 21/64". SUV's – Driver’s Side Only Clamp the Drill Template 1/8" in front of the sill drain. Then drill the holes as above.

DICE ipod BMW Z4 Installation

This “how to” guide installs the kit into a Z4 with no CD changer and a standard business cd (no sat nav), ipod location in the central compartment.
1: The kit
2: Disconnect battery with 10mm socket
3: Now it’s a bit of a pain, but to get easier access to centre console I removed the boot carpet. Use a large flat head screwdriver to remove the retaining screws on the left and the right hand side of the boot. You need to reach behind the carpet to hold the nut at the back.