Automatic Retracting Running Board Installation Instructions

Drill Holes for Rear Arm
Locate the Drill Template in the parts kit. Place it along the sill 1/16" in front of the rear sill drain. Use vise grips to secure the Template to the sill. Drill a 1/8" pilot hole at each location in the Template. Remove the Template and drill the holes out to 21/64".

Drill Holes for Front Arm
Most Vehicles
Clamp the Drill Template to the pinch weld 1/8" behind the front mounting tab. Drill a 1/8" pilot hole at each location in the Template. Remove the Template and drill the holes out to 21/64". SUV's – Driver’s Side Only Clamp the Drill Template 1/8" in front of the sill drain. Then drill the holes as above.