I am not a mechanic, nor do I claim to know the best way to install this kit. This is simply a document detailing
the method I used to install the springs on my wife’s 2007 Dodge Nitro R/T 4.0L.
Installation:
1. Read through all the instructions at least 1 time, and then begin the installation process.
2. Using the 10mm wrench, remove the battery terminal connectors.
3. Remove the bottom bolt from the battery tray; this should free the battery to be lifted out.
4. After the battery has been removed, open the fuse box and disconnect the RED cable using a 13mm socket.
Showing posts with label intake tube. Show all posts
Showing posts with label intake tube. Show all posts
Thursday, December 2, 2010
Dodge Nitro Eibach Pro-Kit Spring Installation
1:33 PM by onesecond
·
0
comments
Labels: 10mm socket, 2007 dodge nitro, battery tray, bolt, bolts, cable management, cables, Dodge, dodge nitro, engine compartment, fuse box, holes, intake tube, kit spring, mechanic, side wheel, socket 5, tube clamp, vacuum unit, wheel
Labels: 10mm socket, 2007 dodge nitro, battery tray, bolt, bolts, cable management, cables, Dodge, dodge nitro, engine compartment, fuse box, holes, intake tube, kit spring, mechanic, side wheel, socket 5, tube clamp, vacuum unit, wheel
Wednesday, May 19, 2010
03-05 Chrysler PT Cruiser Turbo P/N 300-138 Installation
3:58 AM by onesecond
·
0
comments
Labels: air dam, air filter, box assembly, box lid, Chrysler, chrysler pt cruiser, clamp, cool air, intake tube, original place, PDF Download, pt cruiser, snap, upper rim, vehicle c, weather seal, weather strip
Labels: air dam, air filter, box assembly, box lid, Chrysler, chrysler pt cruiser, clamp, cool air, intake tube, original place, PDF Download, pt cruiser, snap, upper rim, vehicle c, weather seal, weather strip
Remove the Factory Air Box Lid
a) Loosen the clamp on the factory intake tube at the air box lid.
b) Unclip the factory air box lid and remove from vehicle.
c) Extract the factory air filter box assembly. (Note: leave the base in place)
d) Unclip and remove the small intake tube attached to the factory air filter box.
e) Replace the factory air filter box in its original place and re-connect the hose it its original location.
a) Loosen the clamp on the factory intake tube at the air box lid.
b) Unclip the factory air box lid and remove from vehicle.
c) Extract the factory air filter box assembly. (Note: leave the base in place)
d) Unclip and remove the small intake tube attached to the factory air filter box.
e) Replace the factory air filter box in its original place and re-connect the hose it its original location.
Saturday, March 20, 2010
6-Speed Short Shift Install
12:52 AM by onesecond
·
0
comments
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
1. Open the package and make sure you received all the appropriate parts.
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
Subscribe to:
Posts (Atom)
