Remove the Factory Air Box Lid
a) Loosen the clamp on the factory intake tube at the air box lid.
b) Unclip the factory air box lid and remove from vehicle.
c) Extract the factory air filter box assembly. (Note: leave the base in place)
d) Unclip and remove the small intake tube attached to the factory air filter box.
e) Replace the factory air filter box in its original place and re-connect the hose it its original location.
Showing posts with label box lid. Show all posts
Showing posts with label box lid. Show all posts
Wednesday, May 19, 2010
03-05 Chrysler PT Cruiser Turbo P/N 300-138 Installation
3:58 AM by onesecond
·
0
comments
Labels: air dam, air filter, box assembly, box lid, Chrysler, chrysler pt cruiser, clamp, cool air, intake tube, original place, PDF Download, pt cruiser, snap, upper rim, vehicle c, weather seal, weather strip
Labels: air dam, air filter, box assembly, box lid, Chrysler, chrysler pt cruiser, clamp, cool air, intake tube, original place, PDF Download, pt cruiser, snap, upper rim, vehicle c, weather seal, weather strip
Saturday, March 20, 2010
6-Speed Short Shift Install
12:52 AM by onesecond
·
0
comments
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
1. Open the package and make sure you received all the appropriate parts.
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
Subscribe to:
Posts (Atom)
