INSTALLATION KIT
1) Test each corner for fit to ensure that the CORNERS and CENTER fit correctly.
2) If you are using the tank cover without a gas tank in the truck (IT’S POSSIBLE) you may decide that you want a little more support. If this is the case, braces can be formed from ¾” plywood, angle iron, or MDF pressboard. The areas that need the most support in directly under the package tray area, this is especially important if installing a radio or CD player onto the flat of the package tray.
3) Apply the Foam Edge Tape to the backside of the cover at the top edge and down the sides on the back edge only.
Showing posts with label backside. Show all posts
Showing posts with label backside. Show all posts
Tuesday, September 21, 2010
47-55 Chevy Truck the Eureka Gas Tank Cover Installation Instructions
8:07 PM by onesecond
·
0
comments
Labels: 3m, 55 chevy truck, angle iron, backside, braces, cd player, cheese, Chevrolet, edge tape, fabric, gaps, gas tank, mdf, plywood, radio, spray adhesive, spray glue, square feet, tabs, top edge
Labels: 3m, 55 chevy truck, angle iron, backside, braces, cd player, cheese, Chevrolet, edge tape, fabric, gaps, gas tank, mdf, plywood, radio, spray adhesive, spray glue, square feet, tabs, top edge
Friday, June 4, 2010
55-59 Chevy Truck Kobi Rear Cab Cover Installation
5:19 AM by onesecond
·
0
comments
Labels: backside, Chevrolet, chevy truck, corner pieces, correct option, edge tape, flat surface, foam tape, glue dries, holes, installation test, option 1, PDF Download, pipe glue, retainer, top edge, weights
Labels: backside, Chevrolet, chevy truck, corner pieces, correct option, edge tape, flat surface, foam tape, glue dries, holes, installation test, option 1, PDF Download, pipe glue, retainer, top edge, weights
Test each corner for fit to ensure that the corners are correct.
Option #1: If covering each piece separately:
A) Start by applying the foam edge tape to corner pieces by running it along the entire edge of the panel stopping at both the top and the bottom where the edge of the panel meets the step where the corner pieces are fitted and fixed into the center section. Apply foam tape along the edge of entire center section, keeping the same idea to stop short of the sides that contain the mounted retainer strips that corner pieces will be mounted on.
Option #1: If covering each piece separately:
A) Start by applying the foam edge tape to corner pieces by running it along the entire edge of the panel stopping at both the top and the bottom where the edge of the panel meets the step where the corner pieces are fitted and fixed into the center section. Apply foam tape along the edge of entire center section, keeping the same idea to stop short of the sides that contain the mounted retainer strips that corner pieces will be mounted on.
Friday, May 28, 2010
Custom DashHawk Install on Cadillac CTS using ProClip Hardware
3:48 AM by onesecond
·
0
comments
Labels: backside, blackjack, Cadillac, cadillac cts, car model, dashhawk, gap, location options, motorola, motorola q, outer edges, PDF Download, seam, textured surface, unexpected bonus, universal mounts, velcro, vent mount
Labels: backside, blackjack, Cadillac, cadillac cts, car model, dashhawk, gap, location options, motorola, motorola q, outer edges, PDF Download, seam, textured surface, unexpected bonus, universal mounts, velcro, vent mount
I came upon this companies hardware while looking for a car mount for my Motorola Q. I wanted something beyond the normal universal mounts. ProClip uses a 2 piece system. The vehicle mounts are custom to that vehicle. Depending on the car model they will usually list multiple location options. You then pick the hardware mount for you specific phone, iPod, etc. Most are offered with or with- out a swivel option.
Saturday, March 20, 2010
6-Speed Short Shift Install
12:52 AM by onesecond
·
0
comments
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
1. Open the package and make sure you received all the appropriate parts.
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
Subscribe to:
Posts (Atom)
