47-55 Chevy Truck the Eureka Gas Tank Cover Installation Instructions

INSTALLATION KIT
1) Test each corner for fit to ensure that the CORNERS and CENTER fit correctly.
2) If you are using the tank cover without a gas tank in the truck (IT’S POSSIBLE) you may decide that you want a little more support. If this is the case, braces can be formed from ¾” plywood, angle iron, or MDF pressboard. The areas that need the most support in directly under the package tray area, this is especially important if installing a radio or CD player onto the flat of the package tray.
3) Apply the Foam Edge Tape to the backside of the cover at the top edge and down the sides on the back edge only.

98-01 Toyota Corolla Sport Sway Bar Set Installation

INSTALLATION OF HOTCHKIS FRONT SWAY BAR
1.) Please look at the original front antiroll bar and note the orientation of the front bar. You will want to install the new Hotchkis bar in the same manner.
2.) Use a 14mm wrench and 6mm Allen wrench to remove the nuts holding the end links to the ends of the stock sway bar. Remove the end links from the ends of the sway bar. Retain the hard ware for later use.
3.) Remove the cross piece from the sway bar mount on each side using a 19mm wrench or socket.
4.) Using a 12mm socket or wrench remove one the three mounting brackets.

2001 Hyundai Accent 1.5L Difficulty Filling the Gas Tank

Tests/Procedures: 1. Disconnect the vapor line at the charcoal canister that comes from the liquid vapor separator and goes to the charcoal canister. See if the fuel tank can be easily filled then. 2. If the fuel tank can easily be filled with the vapor line removed from the charcoal canister, reconnect the vapor line and remove the other lines from the charcoal canister and see if the fuel tank can be easily filled. 3. If the