If the EVAP canister leaks (or has leaked) charcoal, it must be replaced. In addition to replacing the canister, the entire EVAP emission control system must be cleaned to remove charcoal particles released by the leaking canister. To clean the EVAP emission control system, use the service procedure starting on page 3.
Showing posts with label charcoal. Show all posts
Showing posts with label charcoal. Show all posts
Wednesday, December 22, 2010
Nissan Evaporative (EVAP) Emission Control System Cleaning Procedure Service Bulletin
1:15 AM by onesecond
·
0
comments
Labels: caution, charcoal, control valve, control valves, duty cycle, emission control system, figure 3, hoses, leaks, Nissan, particles, pressure sensor, purge, system variation, vacuum hose, valve type, volume control
Labels: caution, charcoal, control valve, control valves, duty cycle, emission control system, figure 3, hoses, leaks, Nissan, particles, pressure sensor, purge, system variation, vacuum hose, valve type, volume control
Monday, May 31, 2010
2001 Hyundai Accent 1.5L Difficulty Filling the Gas Tank
2:53 AM by onesecond
·
0
comments
Labels: charcoal, charcoal canister, filler neck, fuel tank, fuel vapors, gas tank, Hyundai, hyundai accent, metal tube, orvr, separator, tank tests, vent valve
Labels: charcoal, charcoal canister, filler neck, fuel tank, fuel vapors, gas tank, Hyundai, hyundai accent, metal tube, orvr, separator, tank tests, vent valve
Tests/Procedures: 1. Disconnect the vapor line at the charcoal canister that comes from the liquid vapor separator and goes to the charcoal canister. See if the fuel tank can be easily filled then. 2. If the fuel tank can easily be filled with the vapor line removed from the charcoal canister, reconnect the vapor line and remove the other lines from the charcoal canister and see if the fuel tank can be easily filled. 3. If the
Subscribe to:
Posts (Atom)
