This instruction sheet is designed to cover a wide variety of vehicle applications. If your vehicle is not equipped with the items referred to in these instructions (EGR, transmission kick-down linkage, air conditioning, or power brakes), proceed to the next step.
Showing posts with label stock hardware. Show all posts
Showing posts with label stock hardware. Show all posts
Saturday, January 29, 2011
Small Block Chevrolet V8 X-Celerator Intake Manifold
2:23 AM by onesecond
·
0
comments
Labels: block chevrolet, Chevrolet, chevrolet v8, manifold installation, stock hardware, vacuum lines, WEIAND, X-Celerator
Labels: block chevrolet, Chevrolet, chevrolet v8, manifold installation, stock hardware, vacuum lines, WEIAND, X-Celerator
Tuesday, August 10, 2010
98-01 Toyota Corolla Sport Sway Bar Set Installation
3:22 AM by onesecond
·
0
comments
Labels: 12mm socket, allen wrench, bolts, bushings, corolla, cross brace, front sway bar, gas tank, grease, hotchkis tuning, mounting brackets, mounting plates, nuts, orientation, professional note, socket 4, stock hardware, Toyota, toyota corolla, toyota corolla sport
Labels: 12mm socket, allen wrench, bolts, bushings, corolla, cross brace, front sway bar, gas tank, grease, hotchkis tuning, mounting brackets, mounting plates, nuts, orientation, professional note, socket 4, stock hardware, Toyota, toyota corolla, toyota corolla sport
INSTALLATION OF HOTCHKIS FRONT SWAY BAR
1.) Please look at the original front antiroll bar and note the orientation of the front bar. You will want to install the new Hotchkis bar in the same manner.
2.) Use a 14mm wrench and 6mm Allen wrench to remove the nuts holding the end links to the ends of the stock sway bar. Remove the end links from the ends of the sway bar. Retain the hard ware for later use.
3.) Remove the cross piece from the sway bar mount on each side using a 19mm wrench or socket.
4.) Using a 12mm socket or wrench remove one the three mounting brackets.
1.) Please look at the original front antiroll bar and note the orientation of the front bar. You will want to install the new Hotchkis bar in the same manner.
2.) Use a 14mm wrench and 6mm Allen wrench to remove the nuts holding the end links to the ends of the stock sway bar. Remove the end links from the ends of the sway bar. Retain the hard ware for later use.
3.) Remove the cross piece from the sway bar mount on each side using a 19mm wrench or socket.
4.) Using a 12mm socket or wrench remove one the three mounting brackets.
Subscribe to:
Posts (Atom)
