MSD Pro-Billet Small Diameter Chevrolet V8 Distributor PN 8570

Installing Distributor:
1. Remove the existing distributor cap without disconnecting any of the spark plug wires.
2. With the cap off, crank the engine until the rotor is aimed at a fixed point on the engine or firewall. Note this position by making a mark (Figure 9).

1967-Later 396-502 C.I.D. Chevrolet V8 Engines Performer RPM Hydraulic Roller Camshafts

Edelbrock Performer RPM hydraulic roller camshafts are ground specifically for use with the corresponding Performer RPM manifold. The Performer RPM manifold #7161 or RPM Air-Gap #7561 (for oval port heads), or Performer RPM #7163 or RPM Air-Gap #7563 (for rectangular port heads), and Performer RPM Hydraulic Roller camshaft #2261 (1965-1989 Mark IV and 1989-1995 Mark V blocks) or 2262 (1996-Up Mark VI blocks with camshaft thrust plate) are designed to work as a team to give you better driveability and performance. They are dyno-matched and street-proven.

MSD Pro-Billet Cam Sync Distributor Chevrolet V8, PN 2357

This distributor is equipped with an adjustable Hall-Effect Cam Sync Sensor for fuel injected engines. The Cam Sync can be adjusted to achieve the proper lead time required for the particular ECU being used.
The distributor also features an adjustable rotor. This allows the rotor phasing to be set properly and compensate for timing changes.

Chevrolet V8 Distributor Installation Instructions with Mechanical and Vacuum Advance

These instructions will help you to install a Summit Racing 850050, 850055 or 850205
How to Install the Distributor
1. If the distributor to be replaced has not already been removed from the engine, remove its cap. Do not remove the spark plug wires at this time.
2. Crank the engine slowly until the rotor blade aims at a fixed point on the engine or firewall. Note this point for future reference.

Small Block Chevrolet V8 X-Celerator Intake Manifold

This instruction sheet is designed to cover a wide variety of vehicle applications. If your vehicle is not equipped with the items referred to in these instructions (EGR, transmission kick-down linkage, air conditioning, or power brakes), proceed to the next step.

MSD Pro-Billet Chevrolet V8 Tach Drive Distributor PN 8571 with Vacuum Advance, PN 8572

The cap of this Distributor requires spark plug style terminals. You may need to change the terminals and boots of your wires. MSD offers two kits, PN 8849 or PN 8848 that are supplied with nine boots and terminals. A socket style cap is available as PN 8437.