INSTALLATION OF HOTCHKIS FRONT SWAY BAR
1.) Please look at the original front antiroll bar and note the orientation of the front bar. You will want to install the new Hotchkis bar in the same manner.
2.) Use a 14mm wrench and 6mm Allen wrench to remove the nuts holding the end links to the ends of the stock sway bar. Remove the end links from the ends of the sway bar. Retain the hard ware for later use.
3.) Remove the cross piece from the sway bar mount on each side using a 19mm wrench or socket.
4.) Using a 12mm socket or wrench remove one the three mounting brackets.
Showing posts with label 12mm socket. Show all posts
Showing posts with label 12mm socket. Show all posts
Tuesday, August 10, 2010
98-01 Toyota Corolla Sport Sway Bar Set Installation
3:22 AM by onesecond
·
0
comments
Labels: 12mm socket, allen wrench, bolts, bushings, corolla, cross brace, front sway bar, gas tank, grease, hotchkis tuning, mounting brackets, mounting plates, nuts, orientation, professional note, socket 4, stock hardware, Toyota, toyota corolla, toyota corolla sport
Labels: 12mm socket, allen wrench, bolts, bushings, corolla, cross brace, front sway bar, gas tank, grease, hotchkis tuning, mounting brackets, mounting plates, nuts, orientation, professional note, socket 4, stock hardware, Toyota, toyota corolla, toyota corolla sport
Subscribe to:
Posts (Atom)
