47-55 Chevy Truck the Eureka Gas Tank Cover Installation Instructions

INSTALLATION KIT
1) Test each corner for fit to ensure that the CORNERS and CENTER fit correctly.
2) If you are using the tank cover without a gas tank in the truck (IT’S POSSIBLE) you may decide that you want a little more support. If this is the case, braces can be formed from ¾” plywood, angle iron, or MDF pressboard. The areas that need the most support in directly under the package tray area, this is especially important if installing a radio or CD player onto the flat of the package tray.
3) Apply the Foam Edge Tape to the backside of the cover at the top edge and down the sides on the back edge only.

55-59 Chevy Truck Kobi Rear Cab Cover Installation

Test each corner for fit to ensure that the corners are correct.
Option #1: If covering each piece separately:
A) Start by applying the foam edge tape to corner pieces by running it along the entire edge of the panel stopping at both the top and the bottom where the edge of the panel meets the step where the corner pieces are fitted and fixed into the center section. Apply foam tape along the edge of entire center section, keeping the same idea to stop short of the sides that contain the mounted retainer strips that corner pieces will be mounted on.