Your PowerAid Throttle Body Spacer was carefully inspected and packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, please contact AIRAID.
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air intake hose assembly.
3. Remove throttle body air intake box and save bolts.
4. Remove (3) bolts from the throttle body.
Showing posts with label cables. Show all posts
Showing posts with label cables. Show all posts
Thursday, December 2, 2010
2003-07 Dodge Dakota 4.7L PowerAid Throttle Body Spacer
1:51 PM by onesecond
·
0
comments
Labels: air intake hose, bolts, cables, cruise, Dodge, dodge dakota, flat head screw, hose assembly, negative battery cable, power plate, poweraid throttle body spacer, reinforcement ring, retainers, spacers, step 2, throttle body spacer, throttle cable, throttle lever, throttle linkage
Labels: air intake hose, bolts, cables, cruise, Dodge, dodge dakota, flat head screw, hose assembly, negative battery cable, power plate, poweraid throttle body spacer, reinforcement ring, retainers, spacers, step 2, throttle body spacer, throttle cable, throttle lever, throttle linkage
Dodge Nitro Eibach Pro-Kit Spring Installation
1:33 PM by onesecond
·
0
comments
Labels: 10mm socket, 2007 dodge nitro, battery tray, bolt, bolts, cable management, cables, Dodge, dodge nitro, engine compartment, fuse box, holes, intake tube, kit spring, mechanic, side wheel, socket 5, tube clamp, vacuum unit, wheel
Labels: 10mm socket, 2007 dodge nitro, battery tray, bolt, bolts, cable management, cables, Dodge, dodge nitro, engine compartment, fuse box, holes, intake tube, kit spring, mechanic, side wheel, socket 5, tube clamp, vacuum unit, wheel
I am not a mechanic, nor do I claim to know the best way to install this kit. This is simply a document detailing
the method I used to install the springs on my wife’s 2007 Dodge Nitro R/T 4.0L.
Installation:
1. Read through all the instructions at least 1 time, and then begin the installation process.
2. Using the 10mm wrench, remove the battery terminal connectors.
3. Remove the bottom bolt from the battery tray; this should free the battery to be lifted out.
4. After the battery has been removed, open the fuse box and disconnect the RED cable using a 13mm socket.
the method I used to install the springs on my wife’s 2007 Dodge Nitro R/T 4.0L.
Installation:
1. Read through all the instructions at least 1 time, and then begin the installation process.
2. Using the 10mm wrench, remove the battery terminal connectors.
3. Remove the bottom bolt from the battery tray; this should free the battery to be lifted out.
4. After the battery has been removed, open the fuse box and disconnect the RED cable using a 13mm socket.
Monday, March 1, 2010
Gateway 500 with Dual FOT Installation tips for BMW
9:37 PM by onesecond
·
0
comments
Labels: BMW, bmw 3 series, bmw dealership, bmw series, bmw vehicles, cables, cd changer, cd text, dension gateway 500, factory cd, fiber optic system, installation location, ipod, minimal system requirements, PDF Download
Labels: BMW, bmw 3 series, bmw dealership, bmw series, bmw vehicles, cables, cd changer, cd text, dension gateway 500, factory cd, fiber optic system, installation location, ipod, minimal system requirements, PDF Download
For All BMW vehicles: A good location to mount the GATEWAY 500 is behind the head unit. If the vehicle is equipped with an existing CD changer connector, the GATEWAY 500 can be connected at this location, but for this type of installation an extension kit for the USB and iPod cables might required to route the wires to the front of the vehicle, use Dension Part# EXT1GW0.
Subscribe to:
Posts (Atom)
