Your PowerAid Throttle Body Spacer was carefully inspected and packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, please contact AIRAID.
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air intake hose assembly.
3. Remove throttle body air intake box and save bolts.
4. Remove (3) bolts from the throttle body.
Showing posts with label retainers. Show all posts
Showing posts with label retainers. Show all posts
Thursday, December 2, 2010
2003-07 Dodge Dakota 4.7L PowerAid Throttle Body Spacer
1:51 PM by onesecond
·
0
comments
Labels: air intake hose, bolts, cables, cruise, Dodge, dodge dakota, flat head screw, hose assembly, negative battery cable, power plate, poweraid throttle body spacer, reinforcement ring, retainers, spacers, step 2, throttle body spacer, throttle cable, throttle lever, throttle linkage
Labels: air intake hose, bolts, cables, cruise, Dodge, dodge dakota, flat head screw, hose assembly, negative battery cable, power plate, poweraid throttle body spacer, reinforcement ring, retainers, spacers, step 2, throttle body spacer, throttle cable, throttle lever, throttle linkage
Thursday, June 10, 2010
2005-Up Pontiac G6 Figure Grille Set Installation Manual
6:42 AM by onesecond
·
0
comments
Labels: bolts, chrome molding, duration, exercise patience, fastener, fasteners, flat head screw, grilles, playing card, Pontiac, pontiac g6, quality materials, radiator, retainers, satisfaction, screw driver, tabs, vehicle location
Labels: bolts, chrome molding, duration, exercise patience, fastener, fasteners, flat head screw, grilles, playing card, Pontiac, pontiac g6, quality materials, radiator, retainers, satisfaction, screw driver, tabs, vehicle location
These grilles are fabricated employing quality materials and finishes, and have been engineered to enhance the look of your vehicle for the duration of its life. Proper installation is essential to your overall satisfaction, so please read these instructions before attempting to install the grilles. Exercise patience; these instructions are intended to assist even the most mechanically challenged.
Saturday, May 29, 2010
2005 Ford Taurus Engine Controls Vacuum Leakage Noise Possible DTC's
11:30 PM by onesecond
·
0
comments
Labels: 0l, 2005 ford taurus, actuator, diagnosis, dtc, electrical connector, engine oil, Ford, ford taurus, indicator lamp, intake manifold, Lincoln, lincoln ls, procedure steps, retainers, sable, upper intake manifold, vacuum, valve action
Labels: 0l, 2005 ford taurus, actuator, diagnosis, dtc, electrical connector, engine oil, Ford, ford taurus, indicator lamp, intake manifold, Lincoln, lincoln ls, procedure steps, retainers, sable, upper intake manifold, vacuum, valve action
Some 2005 Taurus and Sable vehicles equipped with a 3.0L 2V and some 2003-
2005 Lincoln LS vehicles equipped with a 3.0L 4V engine may exhibit a vacuum
leakage noise or lean codes and/or malfunction indicator lamp (MIL) on. The
cause may be a leak at the 0-ring on the intake manifold tuning (IMT) valve.
ACTION
Follow the Service Procedure steps to correct the condition.
2005 Lincoln LS vehicles equipped with a 3.0L 4V engine may exhibit a vacuum
leakage noise or lean codes and/or malfunction indicator lamp (MIL) on. The
cause may be a leak at the 0-ring on the intake manifold tuning (IMT) valve.
ACTION
Follow the Service Procedure steps to correct the condition.
Subscribe to:
Posts (Atom)
