Audi A4L Installation Manual

This interface offers RGB, AV inserting onto A4/A5/Q5 panel in a plug-n-play way without cutting wire or using solders. It also offers these functions:
● super Stable,Clear and high-resolution RGB processing for Navigation map display.
● automatic camera switch.
● Optional adjustable reverse guideline display for helping reversing.
● Speed pulse, Reverse, Night lamp signals decoded from the CAN bus for the aftermarket navigation.

Installation location：
Remove the big plastic part shown by the yellow arrow，[No screws, only hooks]， then the total plastic can be taken down, and then the 4 screws can be seen.
Remove the 4 screws, then the panel can be taken down, the interface can be installed behind it.
There is a 10P cable which is carrying the signals, the interface will be inserted onto this cable.

6Pin connector to the Box：
Yellow：Battery 12V，BLACK：GND，
RED：ACC（can generated），
GREEN：REVERSE，
WHITE ： Switch signal[=5V when MODE pressed]。
GREY：Please do not use

source

Gateway 500 with Dual FOT Installation tips for BMW

For All BMW vehicles: A good location to mount the GATEWAY 500 is behind the head unit. If the vehicle is equipped with an existing CD changer connector, the GATEWAY 500 can be connected at this location, but for this type of installation an extension kit for the USB and iPod cables might required to route the wires to the front of the vehicle, use Dension Part# EXT1GW0.