Removal Procedure
Refer to Approved Equipment for Collision Repair Caution in Cautions and Notices.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
Showing posts with label negative cable. Show all posts
Showing posts with label negative cable. Show all posts
Wednesday, January 19, 2011
2005 Chevrolet Venture Rocker Panel Replacement
1:18 AM by onesecond
·
0
comments
Labels: Chevrolet, chevrolet venture, lower quarter, negative battery cable, negative cable, panel, sir system, weld
Labels: Chevrolet, chevrolet venture, lower quarter, negative battery cable, negative cable, panel, sir system, weld
Thursday, December 30, 2010
MSD Pro-Billet Chevrolet HEI Distributor PN 8365
5:32 AM by onesecond
·
0
comments
Labels: advance mechanism, advance section, battery cables, billet, Chevrolet, curve, definitions, detonation, extreme digital, hei distributor, initial timing, mechanical advance, msd distributors, negative cable, timing functions, traction control, vacuum advance, vacuum line, vacuum source, weights
Labels: advance mechanism, advance section, battery cables, billet, Chevrolet, curve, definitions, detonation, extreme digital, hei distributor, initial timing, mechanical advance, msd distributors, negative cable, timing functions, traction control, vacuum advance, vacuum line, vacuum source, weights
Before installing the MSD Distributor, disconnect the battery cables. When disconnecting the battery cables, always remove the Negative (-) cable first and install it last.
TIMING FUNCTIONS
Before continuing with the installation, here are a few definitions you should be aware of:
Initial Timing: This is the base timing (also referred to as idle timing) of the engine before the centrifugal advance begins.
TIMING FUNCTIONS
Before continuing with the installation, here are a few definitions you should be aware of:
Initial Timing: This is the base timing (also referred to as idle timing) of the engine before the centrifugal advance begins.
Tuesday, November 9, 2010
2002-2006 Honda CR-V Subwoofer Kit Installation Instructions
3:30 AM by onesecond
·
0
comments
Labels: antenna, bolts, careful care, dashboard, flat tip, fuse box, glove box, hazard switch, Honda, honda cr v, negative cable, pins, radio station, retaining clips, seat cd changer, self tapping screw, self tapping screws, subwoofer, tabs
Labels: antenna, bolts, careful care, dashboard, flat tip, fuse box, glove box, hazard switch, Honda, honda cr v, negative cable, pins, radio station, retaining clips, seat cd changer, self tapping screw, self tapping screws, subwoofer, tabs
The subwoofer can not be installed with an under-seat CD changer.
Installation the Subwoofer to 2002-2006 CRV:
1. Make sure you have the anti-theft code for the radio, then write down the radio station presets.
2. Disconnect the negative cable from the battery.
3. Remove the two screws that fasten the bottom of the center panel.
4. Pull the center panel out toward you to release the six clips, unplug the vehicle connector from the hazard switch, and remove the center panel. Be careful care not to damage the clips.
Installation the Subwoofer to 2002-2006 CRV:
1. Make sure you have the anti-theft code for the radio, then write down the radio station presets.
2. Disconnect the negative cable from the battery.
3. Remove the two screws that fasten the bottom of the center panel.
4. Pull the center panel out toward you to release the six clips, unplug the vehicle connector from the hazard switch, and remove the center panel. Be careful care not to damage the clips.
Monday, May 31, 2010
2004 Honda Truck CR-V Alternator Replacement
3:28 AM by onesecond
·
0
comments
Labels: alternator, battery source, bolt, bolts, bulkhead, cr, cushions, Honda, honda truck, negative cable, positive cable, upper brackets
Labels: alternator, battery source, bolt, bolts, bulkhead, cr, cushions, Honda, honda truck, negative cable, positive cable, upper brackets
The alternator replacement removal and installation for 2004 Honda Truck CR-V. 1. Disconnect the battery negative cable, then disconnect the positive cable. 2. Remove the bolt (A) securing the battery clamp, then remove the bulkhead cover (B). 3. Remove the upper brackets and cushions. 4. Remove the drive belt. 5. Remove the auto-tensioner. 6. Remove the three bolts securing the alternator. 7. Disconnect the
Monday, May 17, 2010
MSD Pro-Billet Ready-to-Run Chrysler Distributor
3:54 AM by onesecond
·
0
comments
Labels: advance mechanism, advance section, battery cables, billet, boots, cams, Chrysler, definitions, initial timing, ions, mechanical advance, msd ignition, negative cable, PDF Download, plug style, spark plug, timing functions, vacuum source, weights
Labels: advance mechanism, advance section, battery cables, billet, boots, cams, Chrysler, definitions, initial timing, ions, mechanical advance, msd ignition, negative cable, PDF Download, plug style, spark plug, timing functions, vacuum source, weights
Before installing the MSD Distributor, disconnect the battery cables. When disconnecting the battery cables, always remove the Negative (-) cable ions before attempting the installation.
Note: An MSD Ignition Control is required to use these distributors.
Note: The terminals of this Distributor require spark plug style terminals. You may need to change the terminals and boots of your wires. MSD offers two kits, PN 8849 or PN 8848 that are supplied with nine boots and terminals.
Note: An MSD Ignition Control is required to use these distributors.
Note: The terminals of this Distributor require spark plug style terminals. You may need to change the terminals and boots of your wires. MSD offers two kits, PN 8849 or PN 8848 that are supplied with nine boots and terminals.
Wednesday, May 12, 2010
2002 Chevy Avalanche 1500 Installation Instructions Kit #10073
2:33 AM by onesecond
·
0
comments
Labels: air bag, air bag deployment, battery cables, cable 1, check fuse, Chevrolet, chevy avalanche, fuse panel, level surface, lift kit, negative cable, PDF Download, positive cable, sensors, serious personal injury, srs, supplemental restraint system, technical support, tires
Labels: air bag, air bag deployment, battery cables, cable 1, check fuse, Chevrolet, chevy avalanche, fuse panel, level surface, lift kit, negative cable, PDF Download, positive cable, sensors, serious personal injury, srs, supplemental restraint system, technical support, tires
The Supplemental Restraint System (SRS, or air bag) must be deactivated during lift kit installation to avoid accidental air bag deployment while working near SRS sensors and wiring. Do not allow anyone near the air bag during lift kit installation. Accidental deployment can result in serious personal injury or death. Refer to your factory service manual/owner’s manual for the recommended procedure to disable the SRS. The SRS must be reactivated before driving the vehicle.
Subscribe to:
Posts (Atom)
