Before installing the MSD Distributor, disconnect the battery cables. When disconnecting the battery cables, always remove the Negative (-) cable first and install it last.
TIMING FUNCTIONS
Before continuing with the installation, here are a few definitions you should be aware of:
Initial Timing: This is the base timing (also referred to as idle timing) of the engine before the centrifugal advance begins.
Showing posts with label battery cables. Show all posts
Showing posts with label battery cables. Show all posts
Thursday, December 30, 2010
MSD Pro-Billet Chevrolet HEI Distributor PN 8365
5:32 AM by onesecond
·
0
comments
Labels: advance mechanism, advance section, battery cables, billet, Chevrolet, curve, definitions, detonation, extreme digital, hei distributor, initial timing, mechanical advance, msd distributors, negative cable, timing functions, traction control, vacuum advance, vacuum line, vacuum source, weights
Labels: advance mechanism, advance section, battery cables, billet, Chevrolet, curve, definitions, detonation, extreme digital, hei distributor, initial timing, mechanical advance, msd distributors, negative cable, timing functions, traction control, vacuum advance, vacuum line, vacuum source, weights
Monday, May 17, 2010
MSD Pro-Billet Ready-to-Run Chrysler Distributor
3:54 AM by onesecond
·
0
comments
Labels: advance mechanism, advance section, battery cables, billet, boots, cams, Chrysler, definitions, initial timing, ions, mechanical advance, msd ignition, negative cable, PDF Download, plug style, spark plug, timing functions, vacuum source, weights
Labels: advance mechanism, advance section, battery cables, billet, boots, cams, Chrysler, definitions, initial timing, ions, mechanical advance, msd ignition, negative cable, PDF Download, plug style, spark plug, timing functions, vacuum source, weights
Before installing the MSD Distributor, disconnect the battery cables. When disconnecting the battery cables, always remove the Negative (-) cable ions before attempting the installation.
Note: An MSD Ignition Control is required to use these distributors.
Note: The terminals of this Distributor require spark plug style terminals. You may need to change the terminals and boots of your wires. MSD offers two kits, PN 8849 or PN 8848 that are supplied with nine boots and terminals.
Note: An MSD Ignition Control is required to use these distributors.
Note: The terminals of this Distributor require spark plug style terminals. You may need to change the terminals and boots of your wires. MSD offers two kits, PN 8849 or PN 8848 that are supplied with nine boots and terminals.
Wednesday, May 12, 2010
2002 Chevy Avalanche 1500 Installation Instructions Kit #10073
2:33 AM by onesecond
·
0
comments
Labels: air bag, air bag deployment, battery cables, cable 1, check fuse, Chevrolet, chevy avalanche, fuse panel, level surface, lift kit, negative cable, PDF Download, positive cable, sensors, serious personal injury, srs, supplemental restraint system, technical support, tires
Labels: air bag, air bag deployment, battery cables, cable 1, check fuse, Chevrolet, chevy avalanche, fuse panel, level surface, lift kit, negative cable, PDF Download, positive cable, sensors, serious personal injury, srs, supplemental restraint system, technical support, tires
The Supplemental Restraint System (SRS, or air bag) must be deactivated during lift kit installation to avoid accidental air bag deployment while working near SRS sensors and wiring. Do not allow anyone near the air bag during lift kit installation. Accidental deployment can result in serious personal injury or death. Refer to your factory service manual/owner’s manual for the recommended procedure to disable the SRS. The SRS must be reactivated before driving the vehicle.
Subscribe to:
Posts (Atom)
