Selecting a Mounting Location: The mounting location should not only be as flat as possible but also, allow the siren to project its tone parallel to the road.
For detailed information on mounting locations for certain specific vehicles, see the following pages.
Installation: Position the bracket onto the desired mounting area and mark the centers of the 4 mounting holes using the bracket as a template.
Showing posts with label self tapping screws. Show all posts
Showing posts with label self tapping screws. Show all posts
Tuesday, April 12, 2011
C3100 Speaker Universal Mounting Bracket Kit
1:35 AM by onesecond
·
1 comments
Labels: button head cap screw, hex head screws, Other, self tapping screws
Labels: button head cap screw, hex head screws, Other, self tapping screws
Thursday, March 31, 2011
1998-2002 Ford Crown Victoria SA314 Siren Speaker Installation Guide
2:30 AM by onesecond
·
3
comments
Labels: Ford, ford crown victoria, self tapping screws, siren speaker
Labels: Ford, ford crown victoria, self tapping screws, siren speaker
If you have a Crown Victoria built after the year 2001, you will find that the vehicle horn is installed in the mounting location described below. In order to install this siren, you must first remove the vehicle horn and install it where it is found on the 1998 to 2000 model Crown Victoria. (See: Moving the Vehicle Horn)
Tuesday, November 9, 2010
2002-2006 Honda CR-V Subwoofer Kit Installation Instructions
3:30 AM by onesecond
·
0
comments
Labels: antenna, bolts, careful care, dashboard, flat tip, fuse box, glove box, hazard switch, Honda, honda cr v, negative cable, pins, radio station, retaining clips, seat cd changer, self tapping screw, self tapping screws, subwoofer, tabs
Labels: antenna, bolts, careful care, dashboard, flat tip, fuse box, glove box, hazard switch, Honda, honda cr v, negative cable, pins, radio station, retaining clips, seat cd changer, self tapping screw, self tapping screws, subwoofer, tabs
The subwoofer can not be installed with an under-seat CD changer.
Installation the Subwoofer to 2002-2006 CRV:
1. Make sure you have the anti-theft code for the radio, then write down the radio station presets.
2. Disconnect the negative cable from the battery.
3. Remove the two screws that fasten the bottom of the center panel.
4. Pull the center panel out toward you to release the six clips, unplug the vehicle connector from the hazard switch, and remove the center panel. Be careful care not to damage the clips.
Installation the Subwoofer to 2002-2006 CRV:
1. Make sure you have the anti-theft code for the radio, then write down the radio station presets.
2. Disconnect the negative cable from the battery.
3. Remove the two screws that fasten the bottom of the center panel.
4. Pull the center panel out toward you to release the six clips, unplug the vehicle connector from the hazard switch, and remove the center panel. Be careful care not to damage the clips.
Subscribe to:
Posts (Atom)
