1998-2002 Ford Crown Victoria SA314 Siren Speaker Installation Guide

If you have a Crown Victoria built after the year 2001, you will find that the vehicle horn is installed in the mounting location described below. In order to install this siren, you must first remove the vehicle horn and install it where it is found on the 1998 to 2000 model Crown Victoria. (See: Moving the Vehicle Horn)

1998-Up Ford Crown Victoria Model MS100-04 Compact Speaker Installation

Before Installation
Qualifications
• To properly install an electronic siren: you must have a good understanding of automotive electrical procedures and systems, along with proficiency in the installation and service of safety warning equipment. Always refer to the vehicle's service manuals when performing equipment installations on a vehicle.

Ford Trunk Light Kit Installation

Installing a trunk light kit on a Ford Crown Victoria or Chevrolet Impala requires different installation instructions for different model years. Please use the instructions that pertain to your make and model of vehicle.
1998 and 1999 Ford Crown Victoria
Use the “Ford Trunk Light Kit ETLK01xx” Installation Instructions.

1998 & 2000 Ford Crown Victoria Severe Duty Rear Frame Repair

This procedure is for repairing cracks and installing reinforcement brackets on the rear control arm mounts. Depending on the size of the cracks, some or all of the mounts will require coach welds. All of the control arm mounts will have reinforcement brackets installed on them.

2001 Ford Crown Victoria/Grand Marquis Shock Absorber Installation

All vehicles are equipped with gas pressurized shock absorbers which will extend unassisted. Do not apply heat or flame to the shock absorbers during removal or component servicing. Failure to follow these instructions can result in personal injury.