The subwoofer can not be installed with an under-seat CD changer.
Installation the Subwoofer to 2002-2006 CRV:
1. Make sure you have the anti-theft code for the radio, then write down the radio station presets.
2. Disconnect the negative cable from the battery.
3. Remove the two screws that fasten the bottom of the center panel.
4. Pull the center panel out toward you to release the six clips, unplug the vehicle connector from the hazard switch, and remove the center panel. Be careful care not to damage the clips.
Showing posts with label retaining clips. Show all posts
Showing posts with label retaining clips. Show all posts
Tuesday, November 9, 2010
2002-2006 Honda CR-V Subwoofer Kit Installation Instructions
3:30 AM by onesecond
·
0
comments
Labels: antenna, bolts, careful care, dashboard, flat tip, fuse box, glove box, hazard switch, Honda, honda cr v, negative cable, pins, radio station, retaining clips, seat cd changer, self tapping screw, self tapping screws, subwoofer, tabs
Labels: antenna, bolts, careful care, dashboard, flat tip, fuse box, glove box, hazard switch, Honda, honda cr v, negative cable, pins, radio station, retaining clips, seat cd changer, self tapping screw, self tapping screws, subwoofer, tabs
Saturday, May 15, 2010
2001 Mercedes Benz E 320 Sedan V6-3.2L Door Liner on Rear Door Remove/Install
8:43 PM by onesecond
·
0
comments
Labels: 2l, bottom front, cable 14, control cable, e 320, electrical connections, interior door, Mercedes Benz, recess, retaining clip, retaining clips, screw, side airbag
Labels: 2l, bottom front, cable 14, control cable, e 320, electrical connections, interior door, Mercedes Benz, recess, retaining clip, retaining clips, screw, side airbag
Removing/Installing
1. Press of handle recess (3) using assembly wedge
2. Unscrew screw (4) in the area of the interior door control
3. Unclip cover (11) and unscrew screw (12) With code 293 (rear side airbag)
4. Unscrew screw (1) on lock escutcheon (2) and remove lock escutcheon (2) downwards
5. Press of cover (5) under armrest and unscrew screw (6)
1. Press of handle recess (3) using assembly wedge
2. Unscrew screw (4) in the area of the interior door control
3. Unclip cover (11) and unscrew screw (12) With code 293 (rear side airbag)
4. Unscrew screw (1) on lock escutcheon (2) and remove lock escutcheon (2) downwards
5. Press of cover (5) under armrest and unscrew screw (6)
Subscribe to:
Posts (Atom)
