Warning: The 4x4 transfer box (txb) temperature sensor is fragile and easily damaged. There is absolutely no reason to remove the temperature sensor unless it is being replaced. Removing the Temperature Sensor
701. With the txb cold, trace the cabling back from the txb sensor (Fig.2D) to its connector at the bulkhead (Fig.A & B).
702. Disconnect the sensor, remove the detachable plastic part of the connector (txb side - Fig.1D) and carefully withdraw the cabling back to the underneath of the vehicle - (Facilitates threading through the ring spanner)
Showing posts with label opel. Show all posts
Showing posts with label opel. Show all posts
Sunday, June 20, 2010
Vauxhall Cavalier 4x4 Transfer box Temperature Sensor, Removal & Installation & Oil Level Checking
1:49 AM by onesecond
·
0
comments
Labels: 1d, 4x4, bulkhead, caution, copper, detachable collar, drip tray, dud, fig 2d, loctite, new sensor, nylon ties, oil level, oil spillage, opel, pipe work, temperature sensor, threads, tie bar, vauxhall cavalier
Labels: 1d, 4x4, bulkhead, caution, copper, detachable collar, drip tray, dud, fig 2d, loctite, new sensor, nylon ties, oil level, oil spillage, opel, pipe work, temperature sensor, threads, tie bar, vauxhall cavalier
Vauxhall Cavalier/Opel 4 x 4 Transfer Box Installation
1:45 AM by onesecond
·
0
comments
Labels: bolts, caution, fig 1a, flange, gearbox, grease, heavy duty gloves, ingress, masking tape, mounting bolt, opel, splined shafts, straight angle, temp sensor, temperature sensor, torsion bar, trolley jack, txb, unwanted material, vauxhall cavalier
Labels: bolts, caution, fig 1a, flange, gearbox, grease, heavy duty gloves, ingress, masking tape, mounting bolt, opel, splined shafts, straight angle, temp sensor, temperature sensor, torsion bar, trolley jack, txb, unwanted material, vauxhall cavalier
This procedure assumes the removal procedure has been read and/or followed. CAUTION: If you followed the removal procedure, the gearbox may NOT have any oil in it - do not forget. 500. Inspect the txb (Transfer box) before reinstalling, Clean off any excess jointing compound.
501. Lightly apply grease to the flange of the txb to gearbox coupling (two visible splined shafts), and apply the rubber 'O' ring to the flange.
502. Apply masking tape (Fig.1B) or similar to the fluid coupling and the txb breather/filler connections to prevent ingress of unwanted material while installing the txb.
501. Lightly apply grease to the flange of the txb to gearbox coupling (two visible splined shafts), and apply the rubber 'O' ring to the flange.
502. Apply masking tape (Fig.1B) or similar to the fluid coupling and the txb breather/filler connections to prevent ingress of unwanted material while installing the txb.
Monday, June 7, 2010
AD37 GM/Opel Pin Code Reader Operating Manual
9:02 PM by onesecond
·
0
comments
Labels: antenna, cd 1, computer desktop, double click, electronic circuit board, GM, immobiliser, models, opel, option 1, pc option, pin code, resistor, software installation, usb connector, usb port, year 2000
Labels: antenna, cd 1, computer desktop, double click, electronic circuit board, GM, immobiliser, models, opel, option 1, pc option, pin code, resistor, software installation, usb connector, usb port, year 2000
The AD37 is a small portable device that can read the pin codes from GM/Opel vehicles typically up to year 2000 models. The system consists of an immobiliser which is an integral part of the antenna/coil that is mounted around the ignition barrel.
SYSTEM IDENTIFICATION As a general rule the pin code can be read from all models up to year 2000 vehicles fitted with a white resistor on the immobiliser electronic circuit board. To identify the correct system, the immobiliser unit has to be removed and inspected (Refer to page 7).
SYSTEM IDENTIFICATION As a general rule the pin code can be read from all models up to year 2000 vehicles fitted with a white resistor on the immobiliser electronic circuit board. To identify the correct system, the immobiliser unit has to be removed and inspected (Refer to page 7).
Opel IMMO USB Manual
8:59 PM by onesecond
·
0
comments
Labels: 133mhz processor, caution, diagnostic socket, free usb port, harddisk, hardware interface, hardware requirements, laptop, microsoft, microsoft windows 98, new hardware, opel, system requirements, usb drivers, windows 98, windows procedure, windows xp
Labels: 133mhz processor, caution, diagnostic socket, free usb port, harddisk, hardware interface, hardware requirements, laptop, microsoft, microsoft windows 98, new hardware, opel, system requirements, usb drivers, windows 98, windows procedure, windows xp
1. System requirements: Opel IMMO Reader is a Windows based program that will work on any PC or laptop that has installed Microsoft Windows 98, 2000, ME, XP. Hardware requirements: Any PC or laptop with Pentium / 133MHz processor or higher, and a free USB port.
2. USB Drivers installation: Caution: This hardware interface requires drivers installation to work! Please use only drivers that are supplied with this product. There are no other or better drivers.
2. USB Drivers installation: Caution: This hardware interface requires drivers installation to work! Please use only drivers that are supplied with this product. There are no other or better drivers.
Subscribe to:
Posts (Atom)
