This procedure assumes the removal procedure has been read and/or followed. CAUTION: If you followed the removal procedure, the gearbox may NOT have any oil in it - do not forget. 500. Inspect the txb (Transfer box) before reinstalling, Clean off any excess jointing compound.
501. Lightly apply grease to the flange of the txb to gearbox coupling (two visible splined shafts), and apply the rubber 'O' ring to the flange.
502. Apply masking tape (Fig.1B) or similar to the fluid coupling and the txb breather/filler connections to prevent ingress of unwanted material while installing the txb.
Showing posts with label fig 1a. Show all posts
Showing posts with label fig 1a. Show all posts
Sunday, June 20, 2010
Vauxhall Cavalier/Opel 4 x 4 Transfer Box Installation
1:45 AM by onesecond
·
0
comments
Labels: bolts, caution, fig 1a, flange, gearbox, grease, heavy duty gloves, ingress, masking tape, mounting bolt, opel, splined shafts, straight angle, temp sensor, temperature sensor, torsion bar, trolley jack, txb, unwanted material, vauxhall cavalier
Labels: bolts, caution, fig 1a, flange, gearbox, grease, heavy duty gloves, ingress, masking tape, mounting bolt, opel, splined shafts, straight angle, temp sensor, temperature sensor, torsion bar, trolley jack, txb, unwanted material, vauxhall cavalier
Subscribe to:
Posts (Atom)
