This procedure assumes the removal procedure has been read and/or followed. CAUTION: If you followed the removal procedure, the gearbox may NOT have any oil in it - do not forget. 500. Inspect the txb (Transfer box) before reinstalling, Clean off any excess jointing compound.
501. Lightly apply grease to the flange of the txb to gearbox coupling (two visible splined shafts), and apply the rubber 'O' ring to the flange.
502. Apply masking tape (Fig.1B) or similar to the fluid coupling and the txb breather/filler connections to prevent ingress of unwanted material while installing the txb.
Showing posts with label torsion bar. Show all posts
Showing posts with label torsion bar. Show all posts
Sunday, June 20, 2010
Vauxhall Cavalier/Opel 4 x 4 Transfer Box Installation
1:45 AM by onesecond
·
0
comments
Labels: bolts, caution, fig 1a, flange, gearbox, grease, heavy duty gloves, ingress, masking tape, mounting bolt, opel, splined shafts, straight angle, temp sensor, temperature sensor, torsion bar, trolley jack, txb, unwanted material, vauxhall cavalier
Labels: bolts, caution, fig 1a, flange, gearbox, grease, heavy duty gloves, ingress, masking tape, mounting bolt, opel, splined shafts, straight angle, temp sensor, temperature sensor, torsion bar, trolley jack, txb, unwanted material, vauxhall cavalier
Tuesday, May 25, 2010
2005-2009 Dodge Durango 2WD and 4WD Part #66-1080 Torsion Key Installation
5:02 AM by onesecond
·
0
comments
Labels: 4wd, bolt, Dodge, dodge durango, enough space, fender, flat surface, GM, line measurement, PDF Download, releasing the tension, step 1, stock height, threads, torsion bar, torsion bar unloading tool, wheel, wheels
Labels: 4wd, bolt, Dodge, dodge durango, enough space, fender, flat surface, GM, line measurement, PDF Download, releasing the tension, step 1, stock height, threads, torsion bar, torsion bar unloading tool, wheel, wheels
Step 1: Prior to lifting the vehicle it is recommended that you measure the stock height so that you have a base line measurement. Measure from the bottom of the wheel to the lip of the fender, as in Insert A.
Position vehicle on a flat surface and lift vehicle by the frame so that the front wheels are off the ground. Use a floor jack and jack stands or a (2) two post lift if available. Next, locate the torsion key at the rear of the torsion bar under the cab of the vehicle.
Position vehicle on a flat surface and lift vehicle by the frame so that the front wheels are off the ground. Use a floor jack and jack stands or a (2) two post lift if available. Next, locate the torsion key at the rear of the torsion bar under the cab of the vehicle.
Subscribe to:
Posts (Atom)
