Warning: The 4x4 transfer box (txb) temperature sensor is fragile and easily damaged. There is absolutely no reason to remove the temperature sensor unless it is being replaced. Removing the Temperature Sensor
701. With the txb cold, trace the cabling back from the txb sensor (Fig.2D) to its connector at the bulkhead (Fig.A & B).
702. Disconnect the sensor, remove the detachable plastic part of the connector (txb side - Fig.1D) and carefully withdraw the cabling back to the underneath of the vehicle - (Facilitates threading through the ring spanner)
Showing posts with label oil level. Show all posts
Showing posts with label oil level. Show all posts
Sunday, June 20, 2010
Vauxhall Cavalier 4x4 Transfer box Temperature Sensor, Removal & Installation & Oil Level Checking
1:49 AM by onesecond
·
0
comments
Labels: 1d, 4x4, bulkhead, caution, copper, detachable collar, drip tray, dud, fig 2d, loctite, new sensor, nylon ties, oil level, oil spillage, opel, pipe work, temperature sensor, threads, tie bar, vauxhall cavalier
Labels: 1d, 4x4, bulkhead, caution, copper, detachable collar, drip tray, dud, fig 2d, loctite, new sensor, nylon ties, oil level, oil spillage, opel, pipe work, temperature sensor, threads, tie bar, vauxhall cavalier
Monday, May 17, 2010
1984 Mercedes Benz 190E (201 Chassis) Engine Testing Adjustment
2:36 AM by onesecond
·
0
comments
Labels: air cleaner, automatic climate control, bearing points, check engine oil, coolant, coolant level, dynamometer, dynamometer testing, engine coolant, engine tester, lambda, linkage, measurement sheet, measuring instrument, Mercedes Benz, oil level, tail pipe, test cable, throttle control, throttle valve
Labels: air cleaner, automatic climate control, bearing points, check engine oil, coolant, coolant level, dynamometer, dynamometer testing, engine coolant, engine tester, lambda, linkage, measurement sheet, measuring instrument, Mercedes Benz, oil level, tail pipe, test cable, throttle control, throttle valve
The lambda control and the idle speed emissions level must not be tested when the engine is very hot, e.g. immediately after driving sharply or after measuring engine output on the dynamometer.
Testing, adjusting
1 Complete measurement sheet.
2 Switch off air conditioning or automatic climate control. Move selector lever into position "P".
3 Read out DTC memory. Note: Not available on model year 1984-1986.
Testing, adjusting
1 Complete measurement sheet.
2 Switch off air conditioning or automatic climate control. Move selector lever into position "P".
3 Read out DTC memory. Note: Not available on model year 1984-1986.
Subscribe to:
Posts (Atom)
