The lambda control and the idle speed emissions level must not be tested when the engine is very hot, e.g. immediately after driving sharply or after measuring engine output on the dynamometer.
Testing, adjusting
1 Complete measurement sheet.
2 Switch off air conditioning or automatic climate control. Move selector lever into position "P".
3 Read out DTC memory. Note: Not available on model year 1984-1986.
Showing posts with label linkage. Show all posts
Showing posts with label linkage. Show all posts
Monday, May 17, 2010
1984 Mercedes Benz 190E (201 Chassis) Engine Testing Adjustment
2:36 AM by onesecond
·
0
comments
Labels: air cleaner, automatic climate control, bearing points, check engine oil, coolant, coolant level, dynamometer, dynamometer testing, engine coolant, engine tester, lambda, linkage, measurement sheet, measuring instrument, Mercedes Benz, oil level, tail pipe, test cable, throttle control, throttle valve
Labels: air cleaner, automatic climate control, bearing points, check engine oil, coolant, coolant level, dynamometer, dynamometer testing, engine coolant, engine tester, lambda, linkage, measurement sheet, measuring instrument, Mercedes Benz, oil level, tail pipe, test cable, throttle control, throttle valve
Friday, May 14, 2010
1995 Mercedes Benz E 320 Sedan (124 chassis) Cruise Control Operation
11:11 PM by onesecond
·
0
comments
Labels: chassis, clutch, clutch pedal, control speed, cruise control system, e 320, linkage, Mercedes Benz, operation cruise, proceeds, s2, set speed, short moment, time acceleration, traffic situation, vehicle speed
Labels: chassis, clutch, clutch pedal, control speed, cruise control system, e 320, linkage, Mercedes Benz, operation cruise, proceeds, s2, set speed, short moment, time acceleration, traffic situation, vehicle speed
Cruise control operation. The cruise control system is ready for operation when the ignition is switched on. However, for actual operation, the vehicle speed should be above approx. 40 km/h (approx. 30 mph). As soon as the vehicle is running at the desired speed, touching switch for a short moment in direction of “Accel – Set” or “Decel – Set” will keep this speed constant until the driver engages a different speed or the system is switched off.
Subscribe to:
Posts (Atom)
