Opel IMMO USB Manual

1. System requirements: Opel IMMO Reader is a Windows based program that will work on any PC or laptop that has installed Microsoft Windows 98, 2000, ME, XP. Hardware requirements: Any PC or laptop with Pentium / 133MHz processor or higher, and a free USB port.
2. USB Drivers installation: Caution: This hardware interface requires drivers installation to work! Please use only drivers that are supplied with this product. There are no other or better drivers.
For all Windows XP users: Please disconnect your PC or laptop from Internet before install drivers ! Don't use Windows 'original' drivers! This is important! How to install drivers: Connect OBD interface to any free USB port. This will start Windows procedure to install drivers for the new hardware found. Tell to Windows where the drivers are on your harddisk. If Windows tells you that the driver is not certified by Microsoft just confirm that you want to install it anyway.
How to uninstall drivers: If you wish to uninstall drivers, go to control panel and uninstall drivers with standard procedure.
3. How to work with the software: Connect OBD connector to car diagnostic socket. Then connect hardware interface to any free USB port of your PC or laptop. Start program Opel IMMO. Select ECU from menu. After selecting ECU, press "Connect Selected ECU" button. If everything is OK after few seconds software will read info from it. After successful procedure, all useful buttons on screen will be enabled.

Source