Installation of this baseplate requires removing the plastic belly pan. The brackets attached to the vehicle's frame and the tie down brackets also need to be removed. They will be replaced with the baseplate's side mounts. The plastic around the tie down brackets will need to be trimmed.
1. Read the General Instruction Sheet included with this baseplate.
2. Under the front corners of the car there is a stamped metal bracket that protrudes down with a slot at the bottom. These are called the tie down brackets. The baseplate mounts to the outside of the tie down brackets and to the center engine support bolts, using ten bolts, eight of which are supplied with the baseplate.
Showing posts with label belly pan. Show all posts
Showing posts with label belly pan. Show all posts
Sunday, October 3, 2010
1991-96 Ford Escort Baseplate BX2112 Installation Instructions
2:43 AM by onesecond
·
0
comments
Labels: base tube, baseplate, belly pan, bolts, brackets, car frame, Ford, ford escort, gap, metal bracket, nuts, plastic pieces, spacers, support beam, tabs, three pieces, tie down, tube assembly
Labels: base tube, baseplate, belly pan, bolts, brackets, car frame, Ford, ford escort, gap, metal bracket, nuts, plastic pieces, spacers, support beam, tabs, three pieces, tie down, tube assembly
Friday, May 14, 2010
GRIP Chevy Cobalt Body Kit Installation
2:37 AM by onesecond
·
0
comments
Labels: attachment points, belly pan, body kit, body kits, bolt, bolts, Chevrolet, chevy cobalt, failure, fascia, fasteners, holes, inner fender, paint, PDF Download, pins, wheel
Labels: attachment points, belly pan, body kit, body kits, bolt, bolts, Chevrolet, chevy cobalt, failure, fascia, fasteners, holes, inner fender, paint, PDF Download, pins, wheel
All GRIP body kits need to be properly sanded and primed before painting, even if the part arrives pre-primed. Failure to properly prepare parts before painting can result in poor paint finish and adhesion. Please prefit parts before painting! Once a part has been painted or modified in any way it cannot be returned.
1: Look over vehicle before installing the body kit to make note of all attachment points on existing fascia. Since GRIP uses all existing attachment points, it is very important not to harm existing mounting holes and / or fasteners. Some fasteners that are drilled out cannot be reused. It is very important to use special care when removing the reusable fasteners from the panels since they will not be provided by GRIP. GRIP only provides non-reusable fasteners with its kits.
1: Look over vehicle before installing the body kit to make note of all attachment points on existing fascia. Since GRIP uses all existing attachment points, it is very important not to harm existing mounting holes and / or fasteners. Some fasteners that are drilled out cannot be reused. It is very important to use special care when removing the reusable fasteners from the panels since they will not be provided by GRIP. GRIP only provides non-reusable fasteners with its kits.
Subscribe to:
Posts (Atom)
