1. Read the General Instruction Sheet included with this baseplate.
2. The baseplate attaches to the engine mount braces under the car and to the bumper mounts using eight total bolts which are supplied with the baseplate.
3. Remove the headlight modules. The modules are attached with three screws at the top and back of the module. Remove the screws and pull the headlight forward to detach. Unplug the wiring.
Showing posts with label baseplate. Show all posts
Showing posts with label baseplate. Show all posts
Friday, February 25, 2011
1993-96 Chevrolet Beretta Baseplate BX1614 Installation Instructions
3:25 AM by onesecond
·
0
comments
Labels: baseplate, Chevrolet, chevrolet beretta, four holes, headlight modules, support beams
Labels: baseplate, Chevrolet, chevrolet beretta, four holes, headlight modules, support beams
Tuesday, November 9, 2010
2002-04 Honda CR-V BX2232 Baseplate Installation
3:43 AM by onesecond
·
0
comments
Labels: 10mm socket, auto manufacturer, baseplate, blue ox baseplates, bolt, end plates, fascia, hardware kit, holes, Honda, honda cr v, metric bolts, minor adjustments, push pins, pushpins, rangefinder, tabs, tolerances, tow bar, variations
Labels: 10mm socket, auto manufacturer, baseplate, blue ox baseplates, bolt, end plates, fascia, hardware kit, holes, Honda, honda cr v, metric bolts, minor adjustments, push pins, pushpins, rangefinder, tabs, tolerances, tow bar, variations
Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment.
Many Blue Ox® Baseplates are designed to use existing holes and hardware to mount the baseplate to the towed vehicle. Even though bolts are there, do not assume they are adequate for baseplate mounting. Always use hardware supplied in the hardware kit and existing hardware specified in the Baseplate Installation Instructions.
Many Blue Ox® Baseplates are designed to use existing holes and hardware to mount the baseplate to the towed vehicle. Even though bolts are there, do not assume they are adequate for baseplate mounting. Always use hardware supplied in the hardware kit and existing hardware specified in the Baseplate Installation Instructions.
Sunday, October 3, 2010
1991-96 Ford Escort Baseplate BX2112 Installation Instructions
2:43 AM by onesecond
·
0
comments
Labels: base tube, baseplate, belly pan, bolts, brackets, car frame, Ford, ford escort, gap, metal bracket, nuts, plastic pieces, spacers, support beam, tabs, three pieces, tie down, tube assembly
Labels: base tube, baseplate, belly pan, bolts, brackets, car frame, Ford, ford escort, gap, metal bracket, nuts, plastic pieces, spacers, support beam, tabs, three pieces, tie down, tube assembly
Installation of this baseplate requires removing the plastic belly pan. The brackets attached to the vehicle's frame and the tie down brackets also need to be removed. They will be replaced with the baseplate's side mounts. The plastic around the tie down brackets will need to be trimmed.
1. Read the General Instruction Sheet included with this baseplate.
2. Under the front corners of the car there is a stamped metal bracket that protrudes down with a slot at the bottom. These are called the tie down brackets. The baseplate mounts to the outside of the tie down brackets and to the center engine support bolts, using ten bolts, eight of which are supplied with the baseplate.
1. Read the General Instruction Sheet included with this baseplate.
2. Under the front corners of the car there is a stamped metal bracket that protrudes down with a slot at the bottom. These are called the tie down brackets. The baseplate mounts to the outside of the tie down brackets and to the center engine support bolts, using ten bolts, eight of which are supplied with the baseplate.
Subscribe to:
Posts (Atom)
