Installation of this baseplate requires removing the plastic belly pan. The brackets attached to the vehicle's frame and the tie down brackets also need to be removed. They will be replaced with the baseplate's side mounts. The plastic around the tie down brackets will need to be trimmed.
1. Read the General Instruction Sheet included with this baseplate.
2. Under the front corners of the car there is a stamped metal bracket that protrudes down with a slot at the bottom. These are called the tie down brackets. The baseplate mounts to the outside of the tie down brackets and to the center engine support bolts, using ten bolts, eight of which are supplied with the baseplate.
Showing posts with label tube assembly. Show all posts
Showing posts with label tube assembly. Show all posts
Sunday, October 3, 2010
1991-96 Ford Escort Baseplate BX2112 Installation Instructions
2:43 AM by onesecond
·
0
comments
Labels: base tube, baseplate, belly pan, bolts, brackets, car frame, Ford, ford escort, gap, metal bracket, nuts, plastic pieces, spacers, support beam, tabs, three pieces, tie down, tube assembly
Labels: base tube, baseplate, belly pan, bolts, brackets, car frame, Ford, ford escort, gap, metal bracket, nuts, plastic pieces, spacers, support beam, tabs, three pieces, tie down, tube assembly
Thursday, May 27, 2010
2006 Toyota Corolla Air Conditioning Unit Assy
5:56 PM by onesecond
·
0
comments
Labels: 2006 toyota corolla, air conditioning unit, caution label, clamp, corolla, dirt, illustration, instrument panel, piping, pliers, refrigerant, refrigeration system, release lever, screwdriver, sst, suction hose, Toyota, toyota corolla, tube assembly, water hose
Labels: 2006 toyota corolla, air conditioning unit, caution label, clamp, corolla, dirt, illustration, instrument panel, piping, pliers, refrigerant, refrigeration system, release lever, screwdriver, sst, suction hose, Toyota, toyota corolla, tube assembly, water hose
HINT: Installation is in the reverse order of removal.
1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM SST 07110-58060 (07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)
2. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
a. Install SST to piping clamp. SST 09870-00015 HINT: Confirm the direction of the piping clamp claw and SST using the illustration showing on the caution label.
b. Push down SST and release the clamp lock. NOTE: Be careful not to deform the tube, when pushing SST.
c. Pull SST slightly and push the release lever, then remove the piping clamp with SST.
1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM SST 07110-58060 (07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)
2. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
a. Install SST to piping clamp. SST 09870-00015 HINT: Confirm the direction of the piping clamp claw and SST using the illustration showing on the caution label.
b. Push down SST and release the clamp lock. NOTE: Be careful not to deform the tube, when pushing SST.
c. Pull SST slightly and push the release lever, then remove the piping clamp with SST.
Subscribe to:
Posts (Atom)
