67-72 C-10 Truck Sport Sway Bar Kit 22108 Instructions

Raising Vehicle
Raise front of the vehicle by using a 4 post lift or drive-on ramps. Securely block the rear wheels of the vehicle. Do not remove the front wheels during installation. It is imperative that the vehicle is at ride height for this installation.
Install Frame Mounts
First step is to install the frame mounts. The mounts utilize existing rivet holes in the frame. You will need to air chisel the rivets as shown below. Once the holes are clear, grab the 3/8” x 1.5” hex bolts & washers from the “front” hardware bag and insert them into the rivet holes facing down. Position the mounting bracket to the frame rail and begin fastening the 3/8” bolts with the provided washers and nylock nuts. Do not tighten all the way! Grab the 3/8” x 1.25” hex bolts and drop them into the mount holes on the bracket itself. Don’t forget to use washers. You can now fully tighten the frame bolts at this time.

1987 Mercedes Benz 300TD (124 Chassis) Injection Pump Removal and Installation

Procedure for remove and install injection pump, vehicle: 1987 Mercedes Benz 300TD (124 Chassis) L6-2996cc 3.0L DSL SOHC Turbo 603
Vehicle Level - Powertrain Management - Fuel Delivery and Air Induction - Diesel MFI Pump - Service and Repair - Injection Pump Removal and Installation
PRELIMINARY PROCEDURES
Remove bottom section of noise encapsulation.
Remove belt tensioning device.
Remove fan cowl and fan.