When removing and/or replacing the fuel injector(s), it’s imperative that the below instructions be strictly followed. Failing to do so may result in damage to the injector(s).
Applicability: All Legacy, Impreza and SVX models.
Note: Pliers or any other tools not specified in these instructions should not be used under any circumstances to prevent damage to the fuel injector(s).
Showing posts with label correct position. Show all posts
Showing posts with label correct position. Show all posts
Monday, November 22, 2010
Subaru Fuel Injector Removal Procedures
1:53 AM by onesecond
·
0
comments
Labels: air cleaner, air flow meter, applicability, correct position, engine oil, fingers, flat screwdriver, fuel injector, fuel pump, fuel rail, imperative, impreza, inch blade, o ring, pliers, power steering hose, rubber spacer, Subaru, svx, upper case
Labels: air cleaner, air flow meter, applicability, correct position, engine oil, fingers, flat screwdriver, fuel injector, fuel pump, fuel rail, imperative, impreza, inch blade, o ring, pliers, power steering hose, rubber spacer, Subaru, svx, upper case
Sunday, April 4, 2010
Audi Gateway 500 with Dual FOT Installation
8:58 PM by onesecond
·
0
comments
Labels: Audi, audi vehicles, car radio, cd changer, cd text, correct position, dash cd, dip switch, dip switches, factory cd, glove box, information cd, interface, navigation systems, PDF Download, radio navigation system
Labels: Audi, audi vehicles, car radio, cd changer, cd text, correct position, dash cd, dip switch, dip switches, factory cd, glove box, information cd, interface, navigation systems, PDF Download, radio navigation system
Installation of GATEWAY 500 unit Dual FOT
For All Audi vehicles: A good location to mount the GATEWAY 500 unit is at the CD Changer behind the glove box. If the vehicle is equipped with the in-dash CD Changer, install the GATEWAY 500 unit behind it. Interfacing in the MOST optical ring should be done as shown in the installation guide.
For All Audi vehicles NOT equipped with a factory CD Changer, the GATEWAY 500 interface shall be integrated into the optical MOST ring at the output of the head unit.
For All Audi vehicles equipped with a factory CD Changer, the GATEWAY 500 interface shall be installed at the factory CD Changer location
For All Audi vehicles: A good location to mount the GATEWAY 500 unit is at the CD Changer behind the glove box. If the vehicle is equipped with the in-dash CD Changer, install the GATEWAY 500 unit behind it. Interfacing in the MOST optical ring should be done as shown in the installation guide.
For All Audi vehicles NOT equipped with a factory CD Changer, the GATEWAY 500 interface shall be integrated into the optical MOST ring at the output of the head unit.
For All Audi vehicles equipped with a factory CD Changer, the GATEWAY 500 interface shall be installed at the factory CD Changer location
Subscribe to:
Posts (Atom)
