Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in.
To prevent damage to your vehicle and the changer take the following precautions.
Showing posts with label dip switches. Show all posts
Showing posts with label dip switches. Show all posts
Thursday, March 31, 2011
Neo Changer Instruction Manual
2:19 AM by onesecond
·
0
comments
Labels: dip switches, grounding wire, negative battery cable, Other
Labels: dip switches, grounding wire, negative battery cable, Other
Tuesday, July 13, 2010
Neo Car Audio Installation
2:55 AM by onesecond
·
0
comments
Labels: battery terminal, car audio installation, cars, caution, computer memory, dip switches, hot air, navigation computer, negative battery cable, neo car, Other, radio, security code, short circuit, sunlight
Labels: battery terminal, car audio installation, cars, caution, computer memory, dip switches, hot air, navigation computer, negative battery cable, neo car, Other, radio, security code, short circuit, sunlight
This chapter provides information required for the installation of the Neo iON, it must be read by all users. Thank you for purchasing the Neo iON. Since the Neo iON works in many different vehicles the following steps must be taken to ensure the iON is set up correctly for the vehicle it is being installed in.
Before Installation
To prevent damage to your vehicle and the iON take the following precautions.
1. Turn off the ignition and remove the negative (-) battery cable prior to installation.
NOTE: If the vehicle is equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the battery cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution to avoid causing a short circuit during installation. If your radio has a security code make sure you know the code and how to enter it prior to removing the battery cable. The radio will require this code to operate when the battery terminal is reconnected.
2. Do not install the unit in the following locations:
A. Locations exposed to direct sunlight
B. Locations where hot air flows from the cars heater
First Step (For All Vehicles)
The first and most important step in using the Neo iON is setting the dip-switches on the black box; this makes the iON compatible with the vehicle it is being installed in. The iON will not work if this step is not followed correctly. The dip switches can be found on the side of the black plastic box which connects to the iON. Switches are in the “ON” position when they are switched down. Black box settings for each vehicle can be found on the vehicles installation page. Refer to the index to find the page number within this manual that covers your vehicle.
Source
Before Installation
To prevent damage to your vehicle and the iON take the following precautions.
1. Turn off the ignition and remove the negative (-) battery cable prior to installation.
NOTE: If the vehicle is equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the battery cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution to avoid causing a short circuit during installation. If your radio has a security code make sure you know the code and how to enter it prior to removing the battery cable. The radio will require this code to operate when the battery terminal is reconnected.
2. Do not install the unit in the following locations:
A. Locations exposed to direct sunlight
B. Locations where hot air flows from the cars heater
First Step (For All Vehicles)
The first and most important step in using the Neo iON is setting the dip-switches on the black box; this makes the iON compatible with the vehicle it is being installed in. The iON will not work if this step is not followed correctly. The dip switches can be found on the side of the black plastic box which connects to the iON. Switches are in the “ON” position when they are switched down. Black box settings for each vehicle can be found on the vehicles installation page. Refer to the index to find the page number within this manual that covers your vehicle.
Source
Sunday, April 4, 2010
Audi Gateway 500 with Dual FOT Installation
8:58 PM by onesecond
·
0
comments
Labels: Audi, audi vehicles, car radio, cd changer, cd text, correct position, dash cd, dip switch, dip switches, factory cd, glove box, information cd, interface, navigation systems, PDF Download, radio navigation system
Labels: Audi, audi vehicles, car radio, cd changer, cd text, correct position, dash cd, dip switch, dip switches, factory cd, glove box, information cd, interface, navigation systems, PDF Download, radio navigation system
Installation of GATEWAY 500 unit Dual FOT
For All Audi vehicles: A good location to mount the GATEWAY 500 unit is at the CD Changer behind the glove box. If the vehicle is equipped with the in-dash CD Changer, install the GATEWAY 500 unit behind it. Interfacing in the MOST optical ring should be done as shown in the installation guide.
For All Audi vehicles NOT equipped with a factory CD Changer, the GATEWAY 500 interface shall be integrated into the optical MOST ring at the output of the head unit.
For All Audi vehicles equipped with a factory CD Changer, the GATEWAY 500 interface shall be installed at the factory CD Changer location
For All Audi vehicles: A good location to mount the GATEWAY 500 unit is at the CD Changer behind the glove box. If the vehicle is equipped with the in-dash CD Changer, install the GATEWAY 500 unit behind it. Interfacing in the MOST optical ring should be done as shown in the installation guide.
For All Audi vehicles NOT equipped with a factory CD Changer, the GATEWAY 500 interface shall be integrated into the optical MOST ring at the output of the head unit.
For All Audi vehicles equipped with a factory CD Changer, the GATEWAY 500 interface shall be installed at the factory CD Changer location
Subscribe to:
Posts (Atom)
