Preparation
1. Ensure all lamps and accessories are OFF.
2. Ensure the ignition switch is in the OFF position.
3. Loosen the negative battery cable bolt. Remove negative battery cable from terminal and position away from battery.
4. Wait one (1) minute prior to working on the vehicle to assure SIR roof rail airbag system has been disabled for your safety.
Showing posts with label preparation 1. Show all posts
Showing posts with label preparation 1. Show all posts
Thursday, December 30, 2010
Chevrolet Silverado Rear Vision System Nav Display Installation Instructions
1:35 AM by onesecond
·
0
comments
Labels: bezel, bolts, center punch, Chevrolet, chevrolet silverado, figure 1, inset, lamps, latch handle, mounting bolt, negative battery cable, preparation 1, punch mark, rear vision system, retainer, sill plate, socket 6, step 8, template sheet, work surface
Labels: bezel, bolts, center punch, Chevrolet, chevrolet silverado, figure 1, inset, lamps, latch handle, mounting bolt, negative battery cable, preparation 1, punch mark, rear vision system, retainer, sill plate, socket 6, step 8, template sheet, work surface
Wednesday, May 19, 2010
2007-2008 Chevy SuperRail Mounting Kit #4423 Installation
2:51 AM by onesecond
·
0
comments
Labels: bed layout, centerline, Chevrolet, chevy, dimension table, dimension x, drill holes, mark 3, measurement, mounting brackets, PDF Download, preparation 1, quantities, step 2, template method, vehicle wheels
Labels: bed layout, centerline, Chevrolet, chevy, dimension table, dimension x, drill holes, mark 3, measurement, mounting brackets, PDF Download, preparation 1, quantities, step 2, template method, vehicle wheels
Truck Preparation
1. Check part quantities using the Parts List on Page 2.
2. Block vehicle wheels. Some vehicles may require you to raise the rear of the truck in order to make it easier to drill for installing the mounting brackets on the truck frame.
3. You may wish to remove the wheels, to give yourself greater working room.
4. If you have purchased a template, proceed to “Template Method” below; otherwise, begin with the “Layout Method.”
1. Check part quantities using the Parts List on Page 2.
2. Block vehicle wheels. Some vehicles may require you to raise the rear of the truck in order to make it easier to drill for installing the mounting brackets on the truck frame.
3. You may wish to remove the wheels, to give yourself greater working room.
4. If you have purchased a template, proceed to “Template Method” below; otherwise, begin with the “Layout Method.”
Subscribe to:
Posts (Atom)
