Showing posts with label socket 6. Show all posts
Showing posts with label socket 6. Show all posts

Tuesday, March 8, 2011

Engine Torque Link Installation Procedure

1) Remove front engine mount upper bolt with 14mm socket. The front engine mount is located on the timing cover side of the engine also known as the front of the engine.
2) Install the small torque link bracket as shown in picture. Use supplied M10 bolt and tighten to finger tight. A 13mm wrench or socket is used for this bolt. Do not torque down this bolt just yet.

Thursday, December 30, 2010

Chevrolet Silverado Rear Vision System Nav Display Installation Instructions

Preparation
1. Ensure all lamps and accessories are OFF.
2. Ensure the ignition switch is in the OFF position.
3. Loosen the negative battery cable bolt. Remove negative battery cable from terminal and position away from battery.
4. Wait one (1) minute prior to working on the vehicle to assure SIR roof rail airbag system has been disabled for your safety.