Step 1: Complete Stock Intake.
Step 2: Disconnect vacuum line and pull back.
Step 3: Unclip upper half of air box to remove lid and filter.
Step 4: Pull back rubber mount attached to battery cable. Use pliers if necessary. This will allow stock clamp to be loosened. (To be done in step 5B.)
Step 5: A) Loosen clamp closest to the radiator with 1/4” nut driver. B) Loosen clamp closest to fire wall with 1/4” nut driver. Leave clamps in position.
Showing posts with label nut driver. Show all posts
Showing posts with label nut driver. Show all posts
Monday, March 8, 2010
2007-2008 BMW E82/88 135i Intake kit Installation Instructions
5:41 PM by onesecond
·
0
comments
Labels: 5b, air filters, battery cable, BMW, clamps, fender, hoses, nut driver, PDF Download, pliers, push down, radiator, rubber edge, rubber grommets, screw, step 1, step 3, step 8, stock intake, vacuum line
Labels: 5b, air filters, battery cable, BMW, clamps, fender, hoses, nut driver, PDF Download, pliers, push down, radiator, rubber edge, rubber grommets, screw, step 1, step 3, step 8, stock intake, vacuum line
Subscribe to:
Posts (Atom)
