Installation procedure the grille guard on Honda CR-V
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.
2. Using a flat screwdriver carefully remove all fasteners from factory plastic shroud on top and underneath the vehicle. On the bottom there are (4) on the front and (3) on each side by the fender. On the top there are (7) fasteners.
3. Remove bottom plastic shroud and place it on a working area. Using a hack saw carefully cut the marked area shown in Figure 1.
Showing posts with label hack. Show all posts
Showing posts with label hack. Show all posts
Tuesday, November 9, 2010
07 Honda CR-V Grille Guard Installation Instructions
3:32 AM by onesecond
·
0
comments
Labels: factory bumper, fasteners, fender, flat screwdriver, flat washer, flat washers, grille guard, hack, head bolt, hex head, holes, Honda, honda cr v, mounting bracket, mounting brackets, radiator, radiator support, rear hole, shell, shroud
Labels: factory bumper, fasteners, fender, flat screwdriver, flat washer, flat washers, grille guard, hack, head bolt, hex head, holes, Honda, honda cr v, mounting bracket, mounting brackets, radiator, radiator support, rear hole, shell, shroud
Subscribe to:
Posts (Atom)
