INSTRUCTIONS:
1. Disconnect the negative terminal on the battery. Jack up front the end of truck and support the frame rails with jack stands. NEVER WORK UNDER AN UNSUPPORTED VEHICLE!
2. Starting on the Passenger side of the truck, remove the front tire, brake caliper, sway bar link and the stock shock. Remove the nut holding the tie rod onto the spindle, then separate the tie rod from the spindle and tie it up out of the way.
Showing posts with label sway bar link. Show all posts
Showing posts with label sway bar link. Show all posts
Tuesday, January 11, 2011
1997-03 Dodge Dakota 2 Wheel Drive Upper Control Arm Kit
1:16 PM by onesecond
·
0
comments
Labels: brake caliper, coil, cross shaft, Dodge, FRAME, lower ball joints, sway bar link, upper control arm
Labels: brake caliper, coil, cross shaft, Dodge, FRAME, lower ball joints, sway bar link, upper control arm
Sunday, September 19, 2010
00-05 Mitsubishi Eclipse Front Kit Part No. 75504
9:51 PM by onesecond
·
0
comments
Labels: 7a, bearing, bolts, engine compartment, flat washers, holes, loctite, Mitsubishi, mitsubishi eclipse, mounting bracket, nuts, rubber bushing, rubber side, shaft, strut assembly, sway bar link, thread sealant, wheels
Labels: 7a, bearing, bolts, engine compartment, flat washers, holes, loctite, Mitsubishi, mitsubishi eclipse, mounting bracket, nuts, rubber bushing, rubber side, shaft, strut assembly, sway bar link, thread sealant, wheels
Always keep safety in mind when working on your vehicle. Completely read these instructions before installing the kit.
Preparing the Vehicle
1. Elevate the vehicle and secure the frame with jack stands.
2. Remove the front wheels.
Strut Removal
1. Remove the three nuts securing the upper strut mounting bracket and discard.
NOTE: These are located inside the engine compartment above the strut pocket.
Preparing the Vehicle
1. Elevate the vehicle and secure the frame with jack stands.
2. Remove the front wheels.
Strut Removal
1. Remove the three nuts securing the upper strut mounting bracket and discard.
NOTE: These are located inside the engine compartment above the strut pocket.
Subscribe to:
Posts (Atom)
