1. Remove stock front brake drums, brakes and backing plates. Clean and inspect spindle for cracks. scouring and/or damage. Be sure to thoroughly clean out the 5'f8"-I8 threaded hole at the top of the spindle.--This is extremely important—Use a non-oil based cleaner such as tri-chlorethylene. Clean out the threads with a" bottoming tap if _ necessary, but clean it good.
Showing posts with label bearing. Show all posts
Showing posts with label bearing. Show all posts
Wednesday, February 2, 2011
55-57 Chevrolet Disc Brake Conversion Installation Instructions
2:44 PM by onesecond
·
0
comments
Labels: 57 chevrolet, bearing, Chevrolet, disc brake conversion, emery paper, hex head bolts, Install, roller bearings
Labels: 57 chevrolet, bearing, Chevrolet, disc brake conversion, emery paper, hex head bolts, Install, roller bearings
Sunday, September 19, 2010
00-05 Mitsubishi Eclipse Front Kit Part No. 75504
9:51 PM by onesecond
·
0
comments
Labels: 7a, bearing, bolts, engine compartment, flat washers, holes, loctite, Mitsubishi, mitsubishi eclipse, mounting bracket, nuts, rubber bushing, rubber side, shaft, strut assembly, sway bar link, thread sealant, wheels
Labels: 7a, bearing, bolts, engine compartment, flat washers, holes, loctite, Mitsubishi, mitsubishi eclipse, mounting bracket, nuts, rubber bushing, rubber side, shaft, strut assembly, sway bar link, thread sealant, wheels
Always keep safety in mind when working on your vehicle. Completely read these instructions before installing the kit.
Preparing the Vehicle
1. Elevate the vehicle and secure the frame with jack stands.
2. Remove the front wheels.
Strut Removal
1. Remove the three nuts securing the upper strut mounting bracket and discard.
NOTE: These are located inside the engine compartment above the strut pocket.
Preparing the Vehicle
1. Elevate the vehicle and secure the frame with jack stands.
2. Remove the front wheels.
Strut Removal
1. Remove the three nuts securing the upper strut mounting bracket and discard.
NOTE: These are located inside the engine compartment above the strut pocket.
Subscribe to:
Posts (Atom)
