These white faces are the product of years of research and experimentation. They are printed with a special printer using waterproof and UV resistant ink on high quality adhesive backed vinyl and then laminated with a high-quality, non-glare overlay. Follow these instructions closely and you will have a very nice looking set of gauges in your Volvo. Some of the ideas you see in these instructions were suggested by customers like yourself. If you have an idea that will help future Volvonuts with a smoother installation, please let me know.
Showing posts with label speedometer cable. Show all posts
Showing posts with label speedometer cable. Show all posts
Sunday, August 1, 2010
Volvo 240/260 White Face Gauge Installation 1975-80 Models
5:38 PM by onesecond
·
0
comments
Labels: dash area, face gauge, gauge installation, gauge pod, non glare, plastic fasteners, retainer, rubber band, screwdriver, screws, speedo cable, speedometer cable, steering column, steering wheel, step 1, vent, Volvo, volvo 240, white face, white faces
Labels: dash area, face gauge, gauge installation, gauge pod, non glare, plastic fasteners, retainer, rubber band, screwdriver, screws, speedo cable, speedometer cable, steering column, steering wheel, step 1, vent, Volvo, volvo 240, white face, white faces
Friday, May 14, 2010
U-Cut-To-Fit GM & Chrysler Speedometer Cable Kit Installation Instructions
3:47 AM by onesecond
·
0
comments
Labels: bottoms, cable kit, car source, Chrysler, debur, exhaust pipes, failure, figure 1, GM, grease, hammer, PDF Download, pliers, screw, solid surface, speedometer cable, step 2, step 6, step 8, transmission gear
Labels: bottoms, cable kit, car source, Chrysler, debur, exhaust pipes, failure, figure 1, GM, grease, hammer, PDF Download, pliers, screw, solid surface, speedometer cable, step 2, step 6, step 8, transmission gear
U-Cut-To-Fit Speedometer Cable Kit Installation
Step 1: Install outer housing to speedometer and route housing to transmission, making sure to keep away from exhaust pipes.
Step 2: Hold housing up to transmission to determine length and mark a cut line. Remove housing from vehicle and cut housing at the cut line.
Step 3: After cutting housing, install end of housing into GM or Chrysler trans end fitting. Figure 1 Slide housing nut up and tighten until housing is locked into fitting.
Note: Do Not over tighten nut as it will result in fitting failure.
Step 1: Install outer housing to speedometer and route housing to transmission, making sure to keep away from exhaust pipes.
Step 2: Hold housing up to transmission to determine length and mark a cut line. Remove housing from vehicle and cut housing at the cut line.
Step 3: After cutting housing, install end of housing into GM or Chrysler trans end fitting. Figure 1 Slide housing nut up and tighten until housing is locked into fitting.
Note: Do Not over tighten nut as it will result in fitting failure.
Subscribe to:
Posts (Atom)
