Polyurethane is a flexible material. Occasionally during shipping, sections of the lip may warp or bend in unusual shapes. DO NOT WORRY! Simply lay the lip flat and out in the sun for a day and it will return to its normal shape. To cure the waviness of the front portion, simply purchase a long metal or wood section, clamp this metal section inside the lip (clamps can be purchased at Home Depot), and lay out in the sun for about a day. This will fix the waviness problem.
Showing posts with label painting. Show all posts
Showing posts with label painting. Show all posts
Sunday, November 21, 2010
2004+ Subaru Impreza WRX/STI Front Lip (polyurethane)
11:20 PM by onesecond
·
0
comments
Labels: 2004 subaru impreza, clamps, dupont, flexible material, front lip, grit sandpaper, home depot, horses, lips, painting, polyurethane, shape, shapes, shipping sections, styrofoam, Subaru, subaru impreza, sun, warp, waviness
Labels: 2004 subaru impreza, clamps, dupont, flexible material, front lip, grit sandpaper, home depot, horses, lips, painting, polyurethane, shape, shapes, shipping sections, styrofoam, Subaru, subaru impreza, sun, warp, waviness
Wednesday, October 20, 2010
350Z GT Aero Front Bumper Installation Manual
9:18 PM by onesecond
·
0
comments
Labels: correct positions, degreaser, fender, fenders, fitment, front bumper, holes, job, Nissan, nissan 350z, oem bumper, painting, raw metal, repair manual, rust stop, screws, side bracket, touch up paint
Labels: correct positions, degreaser, fender, fenders, fitment, front bumper, holes, job, Nissan, nissan 350z, oem bumper, painting, raw metal, repair manual, rust stop, screws, side bracket, touch up paint
This product is meant to fit Nissan 350Z only. Please check the parts before mounting.
- Mounting Procedure
Please follow the manufacturer’s repair manual for proper front bumper cover removal procedure.
（Remove the side bracket from the OEM bumper. ）
(Remove the impact foam from the front of the bumper.）
Install the side bracket onto the GT bumper by reversing the steps used to remove it.
Install the GT bumper using the factory clips and screws to the original locations.
- Mounting Procedure
Please follow the manufacturer’s repair manual for proper front bumper cover removal procedure.
（Remove the side bracket from the OEM bumper. ）
(Remove the impact foam from the front of the bumper.）
Install the side bracket onto the GT bumper by reversing the steps used to remove it.
Install the GT bumper using the factory clips and screws to the original locations.
Saturday, October 2, 2010
Bugflector Carflector Installation Instructions
4:22 PM by onesecond
·
0
comments
Labels: brush style, bugflector, car washes, cleaning solvents, debris, dirt, flange, mild soap, painting, PDF Download, style car, surface source
Labels: brush style, bugflector, car washes, cleaning solvents, debris, dirt, flange, mild soap, painting, PDF Download, style car, surface source
A trial fit is recommended to ensure proper positioning and fit, since installing and then removing the Bugflector will significantly degrade the adhesive performance of the tape. Please check fit of parts before painting as we will not accept the return of modified or painted parts, nor assume any responsibility for parts painted in error. Wash your vehicle’s hood to remove any debris and/or dirt. Dry the hood with a clean towel.
Wednesday, July 21, 2010
Audi A4 Avant Roof-edge Spoiler Fitting Instructions
6:06 PM by onesecond
·
0
comments
Labels: abe, abrasive paper, adhesives, application area, Audi, audi a4, compliance, exact position, magnets, paint residue, painting, roof edge, roof spoiler, specialist workshop, tailgate, upper edge
Labels: abe, abrasive paper, adhesives, application area, Audi, audi a4, compliance, exact position, magnets, paint residue, painting, roof edge, roof spoiler, specialist workshop, tailgate, upper edge
The adhesive kit is not included. It must be ordered seperatly according to the parts List. For compliance with the TÜV certificate and ABE other adhesives are not permitted. The adhesive kit, comprising cleaner primer and P1 adhesive, is obtainable as part number 000 071 785 Please read fitting instructions thoroughly before commencing installation. We recommend that fitting of the roof spoiler is carried out by a specialist workshop.
Subscribe to:
Posts (Atom)
