The adhesive kit is not included. It must be ordered seperatly according to the parts List. For compliance with the TÜV certificate and ABE other adhesives are not permitted. The adhesive kit, comprising cleaner primer and P1 adhesive, is obtainable as part number 000 071 785 Please read fitting instructions thoroughly before commencing installation. We recommend that fitting of the roof spoiler is carried out by a specialist workshop.
Showing posts with label audi a4. Show all posts
Showing posts with label audi a4. Show all posts
Wednesday, July 21, 2010
Audi A4 Avant Roof-edge Spoiler Fitting Instructions
6:06 PM by onesecond
·
0
comments
Labels: abe, abrasive paper, adhesives, application area, Audi, audi a4, compliance, exact position, magnets, paint residue, painting, roof edge, roof spoiler, specialist workshop, tailgate, upper edge
Labels: abe, abrasive paper, adhesives, application area, Audi, audi a4, compliance, exact position, magnets, paint residue, painting, roof edge, roof spoiler, specialist workshop, tailgate, upper edge
Audi A4 Avant Quick reference guide
6:01 PM by onesecond
·
0
comments
Labels: alarm system, Audi, audi a4, boot lid, doors and windows, flap, key in lock, key press, quick reference guide, radio, release button, remote control, sun roof, system locks, tank, turn signals, turning the key
Labels: alarm system, Audi, audi a4, boot lid, doors and windows, flap, key in lock, key press, quick reference guide, radio, release button, remote control, sun roof, system locks, tank, turn signals, turning the key
Locking and unlocking the vehicle The central locking system locks and unlocks all the doors, the boot lid and the tank flap. It can be operated with the remote control or by turning the key in the lock. Operating the radio-activated remote control Press the appropriate button for about 1 second. 1 Unlocking button Open one of the doors or the boot lid within about 60 seconds, otherwise the vehicle will lock itself again automatically. 2 Unlocking button for boot lid Press the button for at least 1 second. 3 Locking button The turn signals will flash briefly when the car is locked to con- firm that the doors and the boot lid are closed properly. 4 Folding out the master key Press the release button. Folding away the master key Press the button and fold the key away.
Saturday, March 13, 2010
1999.5-2001 Audi A4 (B5) HID conversion installation instructions
7:36 PM by onesecond
·
0
comments
Labels: amp connector, Audi, audi a4, audi a4 b5, ballast, ballasts, bulbs, cars, conversion, double sided tape, dremel, drill bit, gasket, magnet, PDF Download, pliers, sand paper, screw, screws, turn signal
Labels: amp connector, Audi, audi a4, audi a4 b5, ballast, ballasts, bulbs, cars, conversion, double sided tape, dremel, drill bit, gasket, magnet, PDF Download, pliers, sand paper, screw, screws, turn signal
1. Take the kit out of the box and lay everything out. You can install either the ballasts or bulbs first but typically it is easier to install the bulbs first.
2. There are 3 T27 torx screws holding the headlight on. The 2 on top are visible in this picture.
3. with the 2 screws removed.
4. The third screw is shown here. A long extension is needed to get to it and an extendable magnet is helpful to retrieve the screw (or bit if it falls).
5. Disconnect the headlight and turn signal connectors and remove the headlight by pulling it toward the outside of the car and toward you.
2. There are 3 T27 torx screws holding the headlight on. The 2 on top are visible in this picture.
3. with the 2 screws removed.
4. The third screw is shown here. A long extension is needed to get to it and an extendable magnet is helpful to retrieve the screw (or bit if it falls).
5. Disconnect the headlight and turn signal connectors and remove the headlight by pulling it toward the outside of the car and toward you.
Subscribe to:
Posts (Atom)
