Installation Instructions
Vehicle Weight: The weight of this vehicle is near the Class III, 5,000 lb rating limitations. Some models, depending on options, may well exceed this 5,000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa® II is now rated 10,000 lbs. and either the Aventa® II or the Aventa® LX tow bar must be used for these applications.
Showing posts with label tow hooks. Show all posts
Showing posts with label tow hooks. Show all posts
Sunday, June 19, 2011
Saturday, June 19, 2010
2002-05 Cadillac Escalade Front Bar Part # 4049 Installation Instructions
11:40 PM by onesecond
·
0
comments
Labels: Cadillac, cadillac escalade, factory tow, fasteners, hex bolts, hex nuts, holes, inner edge, models, mounting bracket, mounting brackets, outer edge, PDF Download, spoiler, tow hooks
Labels: Cadillac, cadillac escalade, factory tow, fasteners, hex bolts, hex nuts, holes, inner edge, models, mounting bracket, mounting brackets, outer edge, PDF Download, spoiler, tow hooks
Installing the mounting frame brackets
1. Remove factory tow hooks from front section of vehicle
2. Align driver side mounting bracket to the bottom and outer edge existing holes. Position bracket in manner shown below.
3. Attach mounting frame brackets using the 7/16 x 1 ― hex bolts, 7/16 hex nuts and 7/16 washers. (hand tighten as you may have to move the brackets around slightly, to align the front bar)
NOTE: 2WD models, you may have to cut a space in the plastic spoiler for the bottom of the front bar up rights to slide through and eventually attach to the frame mounting brackets.
1. Remove factory tow hooks from front section of vehicle
2. Align driver side mounting bracket to the bottom and outer edge existing holes. Position bracket in manner shown below.
3. Attach mounting frame brackets using the 7/16 x 1 ― hex bolts, 7/16 hex nuts and 7/16 washers. (hand tighten as you may have to move the brackets around slightly, to align the front bar)
NOTE: 2WD models, you may have to cut a space in the plastic spoiler for the bottom of the front bar up rights to slide through and eventually attach to the frame mounting brackets.
Tuesday, June 1, 2010
2002 Cadillac Escalade Front Bar Part #4049 A Installation Instructions
9:37 PM by onesecond
·
0
comments
Labels: 2002 cadillac escalade, Cadillac, cadillac escalade, factory tow, fasteners, hex bolts, hex nuts, holes, inner edge, models, mounting bracket, mounting brackets, outer edge, PDF Download, spoiler, tow hooks
Labels: 2002 cadillac escalade, Cadillac, cadillac escalade, factory tow, fasteners, hex bolts, hex nuts, holes, inner edge, models, mounting bracket, mounting brackets, outer edge, PDF Download, spoiler, tow hooks
INSTALLING THE MOUTNING FRAME BRACKETS
1. Remove factory tow hooks from front section of vehicle
2. align driver side mounting bracket to the bottom and outer edge existing holes. Position bracket in manner shown below. See figure 1.1
3. attach mounting frame brackets using the 7/16 x 1 ― hex bolts, 7/16 hex nuts and 7/16 washers. (hand tighten as you may have to move the brackets around slightly, to align the front bar)
NOTE: (2WD MODELS YOU MAY HAVE TO CUT A SPACE IN THE PLASTIC SPOILER FOR THE BOTTOM OF THE FRONT BAR UP RIGHTS TO SLIDE THROUGH AND EVENTUALLLY ATTACH TO THE FRAME MOUNTING BRACKETS.
1. Remove factory tow hooks from front section of vehicle
2. align driver side mounting bracket to the bottom and outer edge existing holes. Position bracket in manner shown below. See figure 1.1
3. attach mounting frame brackets using the 7/16 x 1 ― hex bolts, 7/16 hex nuts and 7/16 washers. (hand tighten as you may have to move the brackets around slightly, to align the front bar)
NOTE: (2WD MODELS YOU MAY HAVE TO CUT A SPACE IN THE PLASTIC SPOILER FOR THE BOTTOM OF THE FRONT BAR UP RIGHTS TO SLIDE THROUGH AND EVENTUALLLY ATTACH TO THE FRAME MOUNTING BRACKETS.
Subscribe to:
Posts (Atom)
