Door panel removal
1. Open door and lower window.
2. Remove screw from center of armrest and remove armrest from door.
3. Disconnect wire from behind window control panel.
4. Remove screw from behind door handle and remove door handle cover.
5. Disconnect wire from behind door handle cover.
6. Remove speaker cover.
Showing posts with label molding. Show all posts
Showing posts with label molding. Show all posts
Tuesday, June 1, 2010
1996-2000 Honda Civic EX, GX, LX Sedan Signal Mirror Installation Instructions
2:18 AM by onesecond
·
0
comments
Labels: bolts, control panel, drive pin, flat surface, footrest, holes, Honda, honda civic, honda civic ex, mirror installation, molding, nuts, plastic grip, screw, screwdriver, screws, signal mirror, speaker wire, sturdy gloves, wire harness
Labels: bolts, control panel, drive pin, flat surface, footrest, holes, Honda, honda civic, honda civic ex, mirror installation, molding, nuts, plastic grip, screw, screwdriver, screws, signal mirror, speaker wire, sturdy gloves, wire harness
Thursday, March 11, 2010
2006-2008 Audi A3 Body Exterior Removal and Installation
7:26 PM by onesecond
·
0
comments
Labels: 2008 audi a3, adhesive tape, Audi, audi a3, carpet knife, cleaning solution, cutting area, dirt, glass panel, grease, leaks, molding, paint, PDF Download, roof frame, sealant material
Labels: 2008 audi a3, adhesive tape, Audi, audi a3, carpet knife, cleaning solution, cutting area, dirt, glass panel, grease, leaks, molding, paint, PDF Download, roof frame, sealant material
Keep adhesive surface free of dirt and grease. Only cut back adhesive surface shortly before installation. Do not prime or use a cleaning solution on the adhesive surface. Make sure there is a slight overlap at adhesive joining points, otherwise there may be leaks in these areas.
Bonded panel must be inserted in the vehicle within a maximum of 10 minutes after start of application, otherwise the bonding properties of adhesive sealant material will be impaired. Observe minimum curing times for bonded panel Minimum curing times for bonded sunroof panel.
Bonded panel must be inserted in the vehicle within a maximum of 10 minutes after start of application, otherwise the bonding properties of adhesive sealant material will be impaired. Observe minimum curing times for bonded panel Minimum curing times for bonded sunroof panel.
Subscribe to:
Posts (Atom)
