INSTALLING THE GMOS-06
1)With all connections completed to the aftermarket radio, plug the 32 pin harness into the Cadillac’s wiring harness.
*Note: some minor modifications may be necessary to the sub dash cavity to accommodate the GMOS-06.
2) Cycle the key by turning the ignition on then back off, then on again to test the radio.
Showing posts with label volume level. Show all posts
Showing posts with label volume level. Show all posts
Sunday, June 27, 2010
Onstar GMOS06 Installation Instructions
12:01 AM by onesecond
·
0
comments
Labels: aftermarket radio, balance control, Cadillac, cavity, connect one, onstar, PDF Download, pin harness, speakers, volume level, volume settings, wiring harness, yellow wire
Labels: aftermarket radio, balance control, Cadillac, cavity, connect one, onstar, PDF Download, pin harness, speakers, volume level, volume settings, wiring harness, yellow wire
Wednesday, May 5, 2010
OS-2CTS Cadillac CTS/SRX Radio Replacement Installation Instructions
3:12 AM by onesecond
·
0
comments
Labels: aftermarket stereo, amp, Cadillac, cadillac cts, circumstances, consequential damages, factory radio, mirror, obligation, pin harness, rap, speakers, srx, steering wheel, step 1, turn on the radio, volume level, wheel, wheel volume, wire harness
Labels: aftermarket stereo, amp, Cadillac, cadillac cts, circumstances, consequential damages, factory radio, mirror, obligation, pin harness, rap, speakers, srx, steering wheel, step 1, turn on the radio, volume level, wheel, wheel volume, wire harness
Step 1. Pre wire the RAD-18 wire harness to the aftermarket stereo wire harness. If the aftermarket stereo has a mute wire, cut the brown wire as close as possible to pin #16 of the RAD-18 harness and connect this mute output wire to the stereo’s mute wire. The amp remote wire (blue/white) must be connected to the stereo’s remote wire.
Step 2. Connect the black 16 pin and the red 20 pin harness to the factory radio harnesses. Connect the OS-CTS wire harness into the OS-2CTS interface.
Step 2. Connect the black 16 pin and the red 20 pin harness to the factory radio harnesses. Connect the OS-CTS wire harness into the OS-2CTS interface.
Subscribe to:
Posts (Atom)
