If multiple relays or devices are connected to the Ground Out When Running wire of the remote starter, ensure they are all diode isolated in order to avoid feedback and damaging the vehicle. Do not connect to the GOWR in the back of the remote starter when using multiple device or relays.
Showing posts with label circumstances. Show all posts
Showing posts with label circumstances. Show all posts
Wednesday, June 9, 2010
GM-T100 Transponder/Passlock II Bypass Module Installation Procedures
10:08 PM by onesecond
·
0
comments
Labels: circumstances, consequential damages, diode, GM, illustration, jumpers, obligation, passlock ii, PDF Download, programming positions, relays, remote starter, t100, transponder, wiring diagram
Labels: circumstances, consequential damages, diode, GM, illustration, jumpers, obligation, passlock ii, PDF Download, programming positions, relays, remote starter, t100, transponder, wiring diagram
Wednesday, May 5, 2010
OS-2CTS Cadillac CTS/SRX Radio Replacement Installation Instructions
3:12 AM by onesecond
·
0
comments
Labels: aftermarket stereo, amp, Cadillac, cadillac cts, circumstances, consequential damages, factory radio, mirror, obligation, pin harness, rap, speakers, srx, steering wheel, step 1, turn on the radio, volume level, wheel, wheel volume, wire harness
Labels: aftermarket stereo, amp, Cadillac, cadillac cts, circumstances, consequential damages, factory radio, mirror, obligation, pin harness, rap, speakers, srx, steering wheel, step 1, turn on the radio, volume level, wheel, wheel volume, wire harness
Step 1. Pre wire the RAD-18 wire harness to the aftermarket stereo wire harness. If the aftermarket stereo has a mute wire, cut the brown wire as close as possible to pin #16 of the RAD-18 harness and connect this mute output wire to the stereo’s mute wire. The amp remote wire (blue/white) must be connected to the stereo’s remote wire.
Step 2. Connect the black 16 pin and the red 20 pin harness to the factory radio harnesses. Connect the OS-CTS wire harness into the OS-2CTS interface.
Step 2. Connect the black 16 pin and the red 20 pin harness to the factory radio harnesses. Connect the OS-CTS wire harness into the OS-2CTS interface.
Subscribe to:
Posts (Atom)
