An Applied Vehicle has a MIL “On” and has one or both of the following DTCs stored in the ECM:
• P0442 EVAP Small Leak
• P0456 EVAP Very Small Leak
ACTIONS:
Confirm this bulletin applies. Perform CONSULT-II Self-Diagnosis (repair as needed). ECM Part Number Check to determine if this bulletin applies. ECM Reprogramming (needed if a match is found during ECM Part Number Check).
IMPORTANT: The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure (starting on page 2) as it contains information that is essential to successfully completing this repair.
Showing posts with label necessary repair. Show all posts
Showing posts with label necessary repair. Show all posts
Thursday, October 28, 2010
2003 350Z MIL ‘ON’ DTC P0442 (Evap Small Leak) Stored In Self Diagnosis Results
2:13 AM by onesecond
·
0
comments
Labels: confirmation, diagnosis results, dtcs, ecm, electronic service, figure 1, freeze frame, match, necessary repair, Nissan, nissan engine, p0442, self diagnosis, step 1
Labels: confirmation, diagnosis results, dtcs, ecm, electronic service, figure 1, freeze frame, match, necessary repair, Nissan, nissan engine, p0442, self diagnosis, step 1
Friday, May 21, 2010
2004-2007 Mazda RX-8 Engine Cranks No Start Service Bulletin
4:19 PM by onesecond
·
0
comments
Labels: 2007 mazda rx 8, batteries, battery replacement, battery type, clutch, customer information, distances, engine cranks, engine stall, jis, mazda, mazda rx 8, necessary repair, oem, panasonic, panasonic battery, replacement battery, rpm, spark plugs, step 2
Labels: 2007 mazda rx 8, batteries, battery replacement, battery type, clutch, customer information, distances, engine cranks, engine stall, jis, mazda, mazda rx 8, necessary repair, oem, panasonic, panasonic battery, replacement battery, rpm, spark plugs, step 2
Some vehicles (mazda rx-8) may experience difficulty starting (cranks no start). This may occur after driving the vehicle a
short distance without engine reaching normal operating temperature. Examples: starting a vehicle and moving
it to wash it, engine stall due to mis-application of clutch then restart. This commonly occurs at port facilities or
dealer lots where vehicles are frequently started cold, moved for short distances and then turned off. This concern may also occur due to low cranking RPM during engine starting.
short distance without engine reaching normal operating temperature. Examples: starting a vehicle and moving
it to wash it, engine stall due to mis-application of clutch then restart. This commonly occurs at port facilities or
dealer lots where vehicles are frequently started cold, moved for short distances and then turned off. This concern may also occur due to low cranking RPM during engine starting.
Subscribe to:
Posts (Atom)
