General Motors has decided to conduct a Voluntary Emission Recall involving certain 2001-03 Chevrolet Silverado and GMC Sierra model vehicles, equipped with a 4.3L V6 (RPO L35 - VIN W or RPO LU3 - VIN X) engine. The ignition distributor cap and rotor in these vehicles may corrode and cause ignition system failure. This condition may result in rough engine idle, misfire, stalls, engine cranks but does not run and/or illumination of the Malfunction Indicator Lamp (MIL).
Showing posts with label engine cranks. Show all posts
Showing posts with label engine cranks. Show all posts
Saturday, January 29, 2011
2001-2003 Chevrolet Silverado Ignition Distributor System Corrosion Inspect/Replace
2:59 AM by onesecond
·
0
comments
Labels: Chevrolet, chevrolet silverado, debris source, engine cranks, Ignition, rotor, vent holes, ventilation holes
Labels: Chevrolet, chevrolet silverado, debris source, engine cranks, Ignition, rotor, vent holes, ventilation holes
Friday, May 21, 2010
2004-2007 Mazda RX-8 Engine Cranks No Start Service Bulletin
4:19 PM by onesecond
·
0
comments
Labels: 2007 mazda rx 8, batteries, battery replacement, battery type, clutch, customer information, distances, engine cranks, engine stall, jis, mazda, mazda rx 8, necessary repair, oem, panasonic, panasonic battery, replacement battery, rpm, spark plugs, step 2
Labels: 2007 mazda rx 8, batteries, battery replacement, battery type, clutch, customer information, distances, engine cranks, engine stall, jis, mazda, mazda rx 8, necessary repair, oem, panasonic, panasonic battery, replacement battery, rpm, spark plugs, step 2
Some vehicles (mazda rx-8) may experience difficulty starting (cranks no start). This may occur after driving the vehicle a
short distance without engine reaching normal operating temperature. Examples: starting a vehicle and moving
it to wash it, engine stall due to mis-application of clutch then restart. This commonly occurs at port facilities or
dealer lots where vehicles are frequently started cold, moved for short distances and then turned off. This concern may also occur due to low cranking RPM during engine starting.
short distance without engine reaching normal operating temperature. Examples: starting a vehicle and moving
it to wash it, engine stall due to mis-application of clutch then restart. This commonly occurs at port facilities or
dealer lots where vehicles are frequently started cold, moved for short distances and then turned off. This concern may also occur due to low cranking RPM during engine starting.
Subscribe to:
Posts (Atom)
