Mitsubishi Lancer Short Throw Shifter Installation Manual

Follow the steps below for installation the short throw shifter on your Mitsubishi Lancer
1. Carefully unscrew the stock shift knob.
2. Remove ashtray and screw beneath it.
3. Remove two screws from inside the center console storage compartment.
4. Lift up on the rear section of the center console and unclip it from the front section.
5. Remove plastic screw from the driver’s side of the center console (near the gas pedal). Remove the plastic cover and the pop rivet beneath it. Then remove the two screws at the rear of the console (were hidden by the rearward part of the center console that was removed).

Mitsubishi Lancer - How to clean lash adjusters/tappets

Hope this is of help to someone, a cure for lash adjuster 'rattle'. Thanks to Evo 400 and Mark Shead for advice and to Shaunevo for doing it (with a little help from me)
And before somebody says why bother
i. The noise is bloody annoying
ii. It will eventually cause camshaft wear