Showing posts with label teflon. Show all posts
Showing posts with label teflon. Show all posts
Monday, February 28, 2011
03-06 Nissan 350Z Oil Cooler Installation Instructions
2:44 AM by onesecond
·
0
comments
Labels: inlet ports, Nissan, nissan 350z, Oil, oil pressure gauge, ring gasket, teflon, teflon tape
Labels: inlet ports, Nissan, nissan 350z, Oil, oil pressure gauge, ring gasket, teflon, teflon tape
1. Install the small rubber o-rings supplied with the kit onto all the fittings that screw into the oil outlet and inlet ports (threaded). Every connection to the oil filter sandwich block will require a rubber o-ring gasket. Do not use any thread sealer or Teflon tape on any of the fittings to the oil filter, block, cooler, or cooler lines. If you are installing an oil
Saturday, June 12, 2010
1996 Chevy Blazer FT-100D & ATAS-100 Installation
5:34 AM by onesecond
·
0
comments
Labels: 28 july, atas 100, Chevrolet, chevy blazer, diamond antenna, ft 100d, garages, o ring, PDF Download, pl, radio, special thanks, teflon, two feet, wedge plate
Labels: 28 july, atas 100, Chevrolet, chevy blazer, diamond antenna, ft 100d, garages, o ring, PDF Download, pl, radio, special thanks, teflon, two feet, wedge plate
Installation works fine. Power lead (fused) was run from the battery using #10 stranded wire. Ground wire was bonded to the body about two feet from the radio. Ground quality was measured to be excellent. Each vehicle should be checked nevertheless. Mount is the Diamond Antenna #400C, which has the SO-239 base and 6.5’ RG316 Teflon Coax with a PL-259
Subscribe to:
Posts (Atom)
