03-06 Nissan 350Z Oil Cooler Installation Instructions

1. Install the small rubber o-rings supplied with the kit onto all the fittings that screw into the oil outlet and inlet ports (threaded). Every connection to the oil filter sandwich block will require a rubber o-ring gasket. Do not use any thread sealer or Teflon tape on any of the fittings to the oil filter, block, cooler, or cooler lines. If you are installing an oil

Ford Safety Belt Retraction Speed

This article supersedes TSB 04-24-21 to update the NOTE vehicle model years. FOR MUSTANG, AVIATOR, EXPLORER 4DR AND MOUNTAINEER, REFER TO THE FOLLOWING ISSUE BUILD DATE INFORMATION BEFORE A service kit is now available to improve safety belt PERFORMING THIS TSB. TEFLON TAPE HAS retraction speed. ALREADY BEEN INSTALLED DURING PRODUCTION ON SOME OF THESE VEHICLES.
ACTION
See the part application chart and select the • MUSTANG: Only install on vehicles built through appropriate kit. Follow the Instruction Sheet included 6/15/2003. Teflon tape was already installed on in the kit. Refer to Workshop Manual Section vehicles built on/after 6/16/2003. 501-20A for additional information.