1994 Land Rover Timing Belt Replacement Intervals

The information relating to timing belt replacement intervals is additional to the main purpose of this CD, but is included to provide guidance to garages and for customer advice. Where possible the recommended intervals have been compiled from vehicle manufacturers' information. In a few instances no recommendation has been made by the manufacturer and the decision to replace the belt must be made from the evidence of a thorough examination of the condition of the existing belt.

2005+ Toyota Tacoma Service Guide & Vehicle History

Remote Keyless Entry Reprogramming The vehicle should meet the following conditions before proceeding; *The key is NOT in the ignition *Driver’s door is OPEN (The others are CLOSED) *Drivers door UNLOCKED 1) INSERT & REMOVE key from ignition cylinder TWICE within 5sec 2) CLOSE and OPEN the driver’s door TWICE within 40sec 3) INSERT and REMOVE the key into the ignition cylinder 4) CLOSE and OPEN the driver’s door TWICE within 40 seconds 5) INSERT the key in the ignition and CLOSE the driver’s door 6) Turn the ignition switch from LOCK to ON and back to LOCK at 1sec Intervals "2" times to enter REWRITE MODE 7) REMOVE the key from the ignition (The door locks are cycled

2001 Lexus GS 300 L6-3.0L (2JZ-GE) - Reading Diagnostic Trouble Codes

This is the only information provided by the manufacturer for reading diagnostic trouble codes for this system. If compressor lock occurs during A/C operation, the A/C switch indicator on the A/C control assembly starts blinking.
1. WARNING FOR A/C COMPRESSOR LOCK
When this occurs, check for compressor lock (DTC B1422) using diagnosis trouble code check then proceed to inspect the circuit or the component. Compressor lock sensor circuit. (See DTC B1422 Compressor Lock Sensor Circuit)